The Car Hacker’s Handbook Review: CAN Bus, ECUs and Tuning
In short: The Car Hacker’s Handbook by Craig Smith explains how the computers and networks in a modern car communicate, from CAN bus to ECUs and diagnostics. It is not a remapping manual, but it is one of the best books for understanding what a tuning tool does when it talks to an ECU.
Key takeaways
- Covers CAN bus, diagnostics and PIDs, ECU test benches, firmware and a chapter on performance tuning.
- Uses low cost and open source tools, mostly on Linux.
- Published in 2016, so newer protections such as secure gateways are not fully covered.
- Best read together with a calibration book such as Engine Management: Advanced Tuning.

Most chiptuning books start with fuel, air and ignition. The Car Hacker’s Handbook starts somewhere else: with the networks and computers that connect every control unit in a modern car. If you want to understand what your flashing tool is actually doing when it talks to an ECU over the OBD port, this is one of the most useful books you can read. Here is what it covers, who it is for and where it shows its age.
Quick facts
| Title | The Car Hacker’s Handbook: A Guide for the Penetration Tester |
| Author | Craig Smith |
| Publisher | No Starch Press |
| Published | March 2016 |
| Pages | 304 |
| ISBN | 978 1 59327 703 1 |
| List price at the publisher | $49.99 print with free ebook, $39.99 ebook only (checked in October 2026) |
About the author
Craig Smith runs Theia Labs, a research firm focused on security auditing and on building hardware and software prototypes. According to the publisher, he has worked for several car manufacturers, co founded the Hive13 hackerspace and OpenGarages.org, and regularly gives car hacking workshops at security conferences such as DEF CON and RSA. An earlier and shorter version, the Car Hacker’s Manual, was released through Open Garages before this book.
What does the book cover?
The book has 13 chapters and three appendices. Grouped by theme, it moves from how a car communicates to how its electronics can be tested and changed:
- Networks and communication: threat models, bus protocols such as CAN, and talking to the vehicle with SocketCAN on Linux (chapters 1 to 3).
- Diagnostics and reverse engineering: diagnostics and logging, and how to work out what CAN messages mean (chapters 4 and 5).
- ECUs: ECU hacking, building and using ECU test benches, and attacking ECUs and other embedded systems (chapters 6 to 8).
- Beyond the engine: infotainment, vehicle to vehicle communication, using CAN findings and attacking wireless systems with software defined radio (chapters 9 to 12).
- Performance tuning: a chapter dedicated to tuning (chapter 13).
- Appendices: tools of the trade, diagnostic code modes and PIDs, and how to create your own Open Garage.
Throughout, the book uses low cost and open source tools. The publisher names Metasploit, Wireshark, Kayak, can utils and ChipWhisperer among them.
Why does it matter for chiptuners?
A remap is software written to a control unit. Everything around that write, the diagnostic session, the bus traffic, the protections and the bench connection, is what this book explains. Three parts stand out for our readers:
- Diagnostics and PIDs: chapter 4 and appendix B explain diagnostic modes and parameter IDs, the same language your scan tool and data logger use.
- ECU test benches: chapter 7 covers building a bench to work on an ECU outside the car, the same idea behind bench mode in tools like the one in our Autotuner tool guide.
- ECU and firmware attacks: chapters 6 and 8 explain how firmware is read and analysed, useful background for our Bosch EDC17 guide and its section on read methods and protections.
Who is it for?
- Tuners and technicians who want to understand the electronics behind their tools, not only use them.
- Readers comfortable with a computer and willing to use Linux and command line tools.
- Anyone interested in vehicle security and how manufacturers protect their ECUs.
It is not a step by step remapping manual. If you want to learn how to edit fuel or boost maps, a book such as Engine Management: Advanced Tuning is a better starting point.
Strengths and limitations
- Strength: it explains how the car network works from the ground up, which makes later learning much easier.
- Strength: the focus on low cost and open source tools means you can follow along without expensive equipment.
- Limitation: it was published in 2016. Newer cars often add secure gateways and stronger protection against flashing, so some methods need updating for recent models.
- Limitation: it is written from a security testing point of view, so a good part of the book, such as infotainment and wireless attacks, is outside chiptuning.
Our verdict
The Car Hacker’s Handbook is a strong foundation book for anyone who works with ECUs. Read it alongside a calibration book: one explains how the car talks, the other explains what to change. Keep in mind its age when you work on recent cars, and always work only on vehicles you own or are authorised to work on, within your local law.
Frequently asked questions
Is The Car Hacker’s Handbook useful for ECU tuning? Yes as background. It explains diagnostics, CAN bus, ECU benches and firmware, and has a chapter on performance tuning, but it does not teach map editing step by step.
Is it up to date? It was published in 2016. The fundamentals still apply, but newer cars add protections it does not fully cover.
Where to get it
The print edition from No Starch Press includes the ebook. It is also widely available from bookstores and online retailers using ISBN 978 1 59327 703 1.
Related reading
- Engine Management: Advanced Tuning
- Bosch Handbook for Diesel Engine Management
- Chiptuning basics
- All chiptuning books
Sources
- No Starch Press: Car Hacker’s Handbook
- Penguin Books Australia: The Car Hacker’s Handbook
- Open Garages: The Car Hacker’s Handbook
