Engine Management: Advanced Tuning Review
In short: Engine Management: Advanced Tuning by Greg Banish explains how an electronic fuel injection system decides what the engine does, and how a calibrator changes those decisions. It is one of the few books written from a calibration engineer’s point of view, and still one of the most useful for anyone who edits maps.

Key takeaways
- Published by S-A Design (CarTech) in 2007, 128 pages.
- Explains how the EFI system controls fuel, air and ignition, and how calibration parameters change it.
- Includes equations, graphs and real world calibration examples.
- Platform neutral, so it applies to any fuel injected, electronically controlled engine.
Most tuning books describe parts. This one describes calibration: how the ECU decides fuel, airflow and timing, and how changing its tables changes the engine. For anyone using map editing software, that is the core skill.
Quick facts
| Detail | Value |
|---|---|
| Title | Engine Management: Advanced Tuning |
| Author | Greg Banish |
| Publisher | S-A Design, an imprint of CarTech |
| Published | June 2007 |
| Pages | 128 |
| ISBN | 978 1 932494 42 6 |
About the author
Greg Banish is a calibration engineer with a degree in mechanical engineering from GMI Engineering and Management Institute, now Kettering University. According to the publisher, he had performed more than a thousand calibrations when he wrote the book, working with both enthusiasts and vehicle manufacturers. He has since written further books for CarTech, including one on OBD I and OBD II diagnostics.
What does the book cover?
- How the EFI system determines engine operation.
- The balance of fuel, air and ignition timing an engine needs to reach its potential.
- How the calibrator changes the controlling parameters to optimise performance and driveability.
- Equations, graphs and practical examples drawn from the author’s calibration work.
Why does it matter for chiptuners?
This is the book closest to the daily work of a tuner. It explains what the tables in a map actually control and how they interact, which is the knowledge that separates a good remap from a copied one. Our Bosch EDC17 ECU guide shows how these principles apply to a widely used diesel ECU.
Who is it for?
Tuners and calibrators who already know the basics and want to understand calibration properly, and enthusiasts who use map editing software on their own cars.
Strengths and limitations
- Strength: written by a working calibration engineer, with real examples.
- Strength: platform neutral principles that apply to petrol and diesel engines.
- Limitation: examples lean towards petrol engines and the US aftermarket.
- Limitation: it does not cover tools, file handling or ECU protection.
Our verdict
Engine Management: Advanced Tuning remains one of the essential books for anyone who edits maps. Pair it with The Car Hacker’s Handbook for the communication side of the ECU.
Frequently asked questions
Is Engine Management: Advanced Tuning good for beginners? It assumes some basic knowledge of engines and fuel injection. Beginners may want an introductory book first.
Does it cover diesel engines? The principles apply to diesel calibration, but most examples are from petrol engines.
Where to get it
The book was published by S-A Design, an imprint of CarTech, and is available from CarTech and most book retailers.
