Chip Tuning Tools

[ECUtools]

❗️ ChipSoft Winter Sale! ❗️⬅️

✅ Starting today till January 4th, inclusive!

Please use ⭐️ Chiploader2_winter_2021 ⭐️ for the 15% discount on ChipLoader 2 Modules, as well as ⭐️ ChiploaderNG_winter_2021 ⭐️ for the 35% off the ChipLoaderNG Modules!

The orders must to be placed and paid by January 4th.

✅ ChipLoader 2
✅ ChipLoaderNG

[ECUtools]

❗️ K-TAG Update! ❗️

New K-TAG protocols to work in Boot and Service Mode with ECU Bosch equipped on many Link &Co, Mercedes-Benz, Nissan, Renault, and Volvo vehicles

The ECUS Bosch involved are:

✅ BOSCH DCU17PC42
✅ BOSCH EDC15C11
✅ BOSCH ME2.1
✅ BOSCH MG1CS080

More information here

➡️ K-TAG Master
➡️ K-TAG Slave

[ECUtools]

❗️ ChipTuning PRO and CombiLoader Modules Winter Sale! ❗️

✅ From December 20th to January 16th inclusive, get up to 22% off on CombiLoader and ChipTuning PRO modules!

➡️ from 72 USD to 432 USD - feel free to use the the promo code ✅ SMS11_winter_2021 ✅ to get 11% off!
➡️ from 433 USD to 1440 USD - ✅ SMS22_winter_2021 ✅ to get the 22% discount!

The orders must to be placed and paid by January 16th.

[ECUtools]

⭐️❗️ Editing software from the creators of FLEX! ❗️⭐️

An editing software StageX PLUS SW License from MagicMotorSport!

StageX is the remapping software developed by Magicomotorsport. The new Online software in PLUS version includes Map recognition and DTC removal functions at no additional cost. Remapping launched in just a few seconds.

✅ 2D and 3D Visualization
✅ Map Pack Recognition
✅ DTC Removal Module Included
✅ Solution Module
✅ File Project History
✅ Autodetect similar project

➡️ The software requires monthly subscription with a 7-day trial period.

The ECU list is to be expanded.

➡️ Please note: Some requested services may require the help of a Tuner for completion.

✅ StageX PLUS SW License

[ECUtools]

❗️ Autotuner Updates! ❗️

Autotuner now supports Bosch EDC17C47/CP07/CP37 on Toyotas, Bosch MED17.5 on Audi and Bosch EDC17CP21 on Saab

Autotuner is now able to perform the following operations:

⭐️ OBD Reading
⭐️ OBD Writing

On the following ECUs:

✅ Bosch EDC17C47
✅ Bosch EDC17CP07
✅ Bosch EDC17CP37

Vehicles concerned:

➡️ Toyota 1.4 D-4D 90hp

✅ Bosch MED17.5

⭐️ OBD Reading
⭐️ OBD Writing

Vehicles concerned:

➡️ Audi 2.0 TFSI 170/200hp
➡️ Audi 2.0 TSI 200hp
➡️ Audi 1.8 TSI/TFSI 120/150/160hp
➡️ Audi 35 TFSI 170hp

✅ Bosch EDC17CP21

⭐️ Bench Reading
⭐️ Bench Writing

Vehicles concerned:

➡️ Saab 2.0 TiD 160/190hp

✅ Autotuner Master
✅ Autotuner Slave

[ECUtools]

❗ PCMflash new module! ❗


➡ Module 96 ZF TC1782/TC275/TC277 Bootloader: https://ecutools.eu/chip-tuning/pcmflash/module-96/


⚡ Module 96 - service mode support for ZF 8HP Gen 3, ZF 9HP, ZF 8DT (PDK2-TC400), MB 8G (VGS3-FDCT), VAZ AMT, Renault JHQ TCUs with TC1782, TC275 and TC277 microcontrollers.


✅ ZF TC1782/TC275/TC277 TCU (FLASH) [RD/WR/CK]
✅ ZF TC1782/TC275/TC277 TCU (EEPROM) [RD/WR]

[ECUtools]

❗️ New M&D flasher is open for pre-order! ❗️

License 88 — for Dacia, Lada, Nissan, Renault with EMS3120 / EMS3125 / ValeoV4x: duckduckduckduck OFF

✅ Full flash file read in BSL mode is required for working with this license.

Additional functions:

✅ The checksums are automatically calculated

More information here

The activation files will be sent within a week after 29.11.2021

[ECUtools]

⭐️❗️ bFlash Update V2111A ❗️⭐️

The new PUBLIC BETA bench protocol provides full access to internal flash and EEPROM memory in the transmissions listed.

✅ Full reading and writing, without opening the TCU.

➡️ NEW BENCH PROTOCOLS

ALPINE
✅ 7DCT300-SH725xx

AUDI
✅ DQ381-SH725xx
✅ DQ500.g3-SH725xx

MERCEDES
✅ VGS-NAG3 SH725xx - (9G-Tronic)

RENAULT
✅ 7DCT300-SH725xx

SEAT
✅ DQ381-SH725xx

SKODA
✅ DQ381-SH725xx

VW
✅ DQ381-SH725xx
✅ DQ500.g3-SH725xx

➡️ bFlash Master
➡️ bFlash Slave

[ECUtools]

⭐️ Happy New Year from ECUTools and news on our working hours and shipping during holidays! ⭐️

We wish you happy New Year and great winter holidays! Thank you so much for choosing us! We appreciate your involvement and wish you all the best today and in the upcoming 2022!

This year was a great step forward for us, as we have kept updating the already present tools and added some new ones.

✅ For your convenience we do work during the winter holidays. The activations will be done as usual, beside PCMflash which will be available for activations after January 3rd. Slight delays are also possible.

As for shipping and delivering the tools, EMS will accept packages on January 3rd, 4th and 6th, whereas DHL will be sending parcels after January 8th.

[ECUtools]

❗️ ProBYTE new modules ❗️


✅ Geely MED 17.8.8.1 (CAT EVAP DTC)

✅ JOHN DEERE PHOENIX L21 L 22 (EGR, DPF, DTC)

✅ VAG Group Diesel Bosch EDC16CP34 (EGR DPF DTC)

✅ HONDA KEIHIN Matsuduckduckduckducka SH7055 512KB (CAT OFF)

[ECUtools]

❗️ ChipTuning Telegram Channel with ECUTools ❗️

➡️ We are glad to announce that we are launching a Telegram channel where ChipTuners can ask questions and share their experience!

Please note: English is a preferable language of communication

✅ Feel free to join our community

[ECUtools]

❗️ FLEX version 5.27.0.0 is ready! ❗️

OBD Full and Bench solutions for Mercedes SID310 and SID307 in FLEX!

Magicmotorsport has released new solutions for Mercedes and Infinity vehicles equipped with 1.5 OM607 diesel engines.

Here are some supported vehicles:

✅ Mercedes A200 W176 160 CDI
✅ Mercedes B-Class W246 180 CDI
✅ Mercedes CLA C117 180 CDI
✅ Mercedes GLA X156 180 CDI
✅ Infiniti Q30 1.5D

The new OBD Full and Bench protocol for Continental SID307 and SID310 is available for the following software packages:

✅ FLS0.1 – SW Flex ECU (cars, vans, bikes) OBD + Bench
✅ FLS0.10 – SW Flex Infineon TC17xx Master
✅ FLS0.5 – Package Flex FULL

Read time: ~ 2.30 minutes | Write time: ~ 50 seconds | Lock time: ~ 2.30 minutes

*Lock function allows to disable ECU patch for warranty reasons

➡️ More information here

FLEX Master
FLEX Slave

[ECUtools]

⭐️❗️ PCMflash Update: New Modules and Additions! ❗️⭐️

Protocol updates and three new modules: Mitsubishi CAN-bus Bootloader, Denso SH725xx Bootloader and JLR Gearbox!

PCMflash presents new modules:

✅ Module 79 — Mitsubishi CAN-bus Bootloader
CAN-bus Bootloader FLASH (MH8114F/MH8115F/MH8501F)
CAN-bus Bootloader FLASH (MH8601F/MH8610F/MH8611F/1N83M)

✅ Module 80 — Denso SH725xx Bootloader
SH725xx FLASH [RD/WR/CK]
SH725xx EEPROM [RD/WR]

✅ Module 81 — JLR Gearbox
ZF 6HP26/6HP28 TCM (MPC5xx) [RD/WR/CK]
ZF 8HP70 TCM (SH725xx) [RD/WR/CK]

And some valuable updates:

➡️ Module 8 now supports Denso ECUs equiped in the US vehicles with LF motors. Supports reading, writing, checksum correction.

➡️ Module 57 supports ECU SIMOS12.1 / SIMOS12.2. It supports virtual reading, OBD writing and checksum correction.

➡️ Module 68 — JLR Denso — now supports one more protocol for Denso ECU in Range Rover vehicles. Reading, writing, and checksum correction are supported.

➡️ Module 69 has added support for ECU ME9.7 with engines M156, M272, M273. Calibrations reading, writing, checksum correction.

➡️ Module 77 — Bosch ME9 / MED9 / EDC7 / EDC16 / PSG16 / TCU Bootloader — now has full support of EDC7 ECUs, including EDC7C1 and EDC7C3, as well as automatic transmission ECUs RE5RO5A, 6HP of various modifications, A5SR1 / A5SR2 / A6GF1

PCMflash

[ECUtools]

⭐️❗️ PCMflash Update! ❗️ ⭐️

New modules and additions to the current protocols in PCMflash!

✅ Module 82: Bosch SH725XX TCU Bootloader, designed to work in service mode (on the bench) with Bosch TCUs with SH725xx microcontrollers, available in ZF 8HP, VAG DQ380/381/500, MEG17.9.8, MEG17.9.13, MEG17.9.21, TC60/80. Supports Flash and EEPROM reading, writing, checksum corrections.

✅ Module 83: VAG Bosch DQ380/DQ381/DQ500/ZF 8HP, designed to work via the diagnostic connector with DSG and automatic transmission units used in VAG vehicles. Reading (virtual), writing, checksum corrections.

✅ Module 84: VAG Delphi DCM6.2 supports working via the diagnostic connector of VAG vehicles with Delphi DCM6.2 ECUs. Supports virtual reading, writing, checksum corrections.

✅ Module 85: Ford Gearbox is designed for working via the diagnostic connector with 6HP28, 5R/6R/6 °F/8 °F/10R TCUs of various modifications used in Ford vehicles. Reading, writing and checksum corrections is supported.

➡️ Updates for the existing modules can be found here ⬅️

[ECUtools]

🎉 BitBox Spring Sale 🎉


⭐ BitBox and BitEdit modules with a 15% discount starting today till May 10th! Feel free to use the promo code BBMay2024 to get the discount!


➡ BitBox: https://ecutools.eu/chip-tuning/bitbox/
➡ BitEdit: https://ecutools.eu/chip-tuning/bitedit/


❗ BitBox Slave and Credits are an exception ❗


❗❗❗ Orders must be placed and paid by May 10th.
If you do not use the promo code it means you refuse to partake in the sale ❗❗❗

[ECUtools]

❗️ Autotuner Update for SIM2K and Denso! ❗️

Autotuner now supports Continental SIM2K-xxx and Denso D3-H1-HP via OBD!

➡️ Reading and Writing of the following ECUs:

✅ SIM2K-141
✅ SIM2K-142
✅ SIM2K-240
✅ SIM2K-240R
✅ SIM2K-241
✅ SIM2K-242
✅ SIM2K-245

✅ Denso D3
✅ Denso H1
✅ Denso HP

Vehicles involved:

✅ Kia 1.6i 90hp
✅ Hyundai/Kia 1.8 150hp
✅ Hyundai/Kia 2.0 CVVT 150hp
✅ Hyundai/Kia 2.0T-GDI 245hp
✅ Hyundai/Kia 2.0 MPI 164hp
✅ Hyundai 2.0 T 213hp
✅ Hyundai/Kia 2.0T (N) 275hp
✅ Hyundai/Kia 2.0i 200hp
✅ Hyundai/Kia 2.4i 200hp
✅ Hyundai 2.4 MPI 179hp

✅ Nissan 2.5 Dci 110/130/174/190hp
✅ Renault 2.5 Dci 110/130hp

Autotuner Master
Autotuner Slave

---

[ECUtools]

❗️ ECM Titanium drivers update! ❗️

ECM Titanium driver update on Bosch EDC17CP57 equipped on Mercedes-Benz Vehicles!

➡️ This ECU equips some of the diesel-powered vehicles by Mercedes-Benz, in particular the 3.0l and 2.2l diesel engines equipped both on commercial vehicles (Mercedes X-Class and Sprinter) and on passenger cars (Mercedes E-Class, ML, GLC, GLE, etc.) .

Below is an example of the maps that can be changed:

✅ ENGINE TORQUE (Torque monitoring, Requested Torque, Torque Limiters, etc.)
✅ INJECTION SYSTEM (Fuel Injected Quantity, Smoke Limiters, Injection Phase, etc.)
✅ AIR CONTROL (Exhaust Gas Temperature)
✅ TURBO (Turbo Pressure Limiter, Turbo Pressure, Variable Geometry Control)
✅ RAIL (Rail Pressure, Rail Pressure Limiter)

⭐️ Alientech ECM Titanium

[ECUtools]

➡️❗️S&V Edit Winter Sale!❗️⬅️

From December 25th to January 10th — 5%-20% discounts on S&V Edit modules (modules must be for ONE dongle):

✅ If you buy S&V Edit modules for 77 USD or more, use the promo code ⭐SV_winter_2021⭐ to get your 5% discount;
✅ If you buy S&V Edit modules for 306 USD or more, use the promo code ⭐SV10_winter_2021⭐ to get your 10% discount;
✅ If you buy S&V Edit modules for 761 USD or more, use the promo code ⭐SV15_winter_2021⭐ to get your 15% discount;
✅ If you buy S&V Edit modules for 1522 USD or more, use the promo code ⭐SV20_winter_2021⭐ to get your 20% discount.

The orders must be placed and paid by January 10th.

S&V Edit

[ECUtools]

❗ PCMflash Update! ❗


✅ Module 51 - a new test protocol for Delphi MT95.1 used in Oting Paladin with 2.0L petrol engines.
✅ Module 80 now supports AdBlue ECUs used in Hino vehicles with the 1N83M microcontroller.
✅ Module 94 now supports Aisin ECUs with SH7055S microcontrollers used in AF33 and AF40 gearboxes in Chevrolet and Opel vehicles.


PCMflash: https://ecutools.eu/chip-tuning/pcmflash/

[ECUtools]

❗️ MMCFlasher Winter Sale! ❗️

✅ From December 26th to January 7th save up to 15% on MMCFlasher modules, with the exception of the module packs

Up to 211 USD purchse of modules per dongle grants you 10% off if you use the promo code ➡️MMC10_winter_2021⬅️
If you buy modules for more than 211 USD, you can use the promo code ➡️MMC15_winter_2021⬅️ for a 15% discount

The orders must be placed and paid by January 7th.