Chip Tuning Tools

[ECUtools]

⭐️❗️ Combiloader WINTER SALE! ❗️⭐️

✅ Till January 10th — 10%-20% discounts on ALL Combiloader modules:

➡️ If you buy for 72 USD - 721 USD, use the promo code ⭐️combiloadersale102020⭐️ to get your 10% discount.
➡️ If you buy for more than 722 USD, use the promo code ⭐️combiloadersale202020⭐️ to get your 20% discount.

⭐️ CombiLoader

[ECUtools]

⭐️❗️ S&V Edit Winter Sale! ❗️⭐️

A brand new tool for disabling systems, S&V Edit with 5-15% off!

⭐️ The modules for this tool are still being added to our website every day, so feel free to check later if the module you need is up!

When buying one module, use the promo code ➡️svedit_1⬅️ to get 5% off;
When buying two modules, use the promo code ➡️svedit_2⬅️ to get 10% off;
When buying three or more modules, use the promo code ➡️svedit_3⬅️ to get 15% off;

Starting today till January 10th, 2021

S&V Edit

[ECUtools]

❗️ BitBox Update: A New Module and Additions! ❗️

➡️ New modules:
⭐️ Isuzu Transtron SH7058/SH7059/SH72533/SH72544 supports reading/writing and checksums calculation.

➡️ New families:
✅ Ford Continental EMS2701 TC1782 added to module Ford Continental Petrol CAN with virtual reading/writing and checksums calculation.

➡️ Improvements and fixes:
✅ Bosch MG1CA094 with SPC572 added to module Bosch MD1/MG1 Bench with reading/writing/recovery/checksums calculation and EEPROM reading.
✅ Some stability fixes for SIM2K-260 on SM2 devices.
✅ Added support for Mazda Mitsubishi Gen4 M41 ECUs.

⭐️ BitBox
⭐️ Isuzu Transtron

[ECUtools]

❗️ New BitEdit Module for Mitsubishi! ❗️

⭐️ Calibrations editing of Denso ECU of diesel Mitsubishi vehicles. MCU supported is SH72xx.

Supported filesize — 2.0 Mb.

➡️ Available maps:

✅ Airmass flow
✅ Boost pressure
✅ Injection
✅ Injection volume
✅ Injection volume limitation
✅ Rail pressure
✅ Torque
✅ Torque from injection volume
✅ DTC

BitEdit
Mitsubishi Denso Diesel SH72xxx

[ECUtools]

⭐❗ New Module in BitBox 3.3.6 rev. 1 ❗⭐

✅ Bosch MG1/MD1 Bench
Universal module for Bench reading and writing for Bosch MG1/MD1 ECUs based on SPC and Aurix MCUs.
❗ Attention! The module works only with Scanmatik 2 Pro. It requires bench connection to the ECU with any adapter with automatic power control (BITS001, Powerbox, etc.).

✅ VAG Continental Simos12.1 is now ready for tests.

➡ Fixes and improvements:

☑️ Bosch INVCON3.3 support added to Bosch MG1/MD1 Bench.
☑️ Delphi MT05 read/clear DTC has been returned
☑️ Kia/Hyundai SIM2K-25X/26X now works with Scanmatik2Pro. It is recommended to use it.
☑️ PSA Continental SID208 now works with Scanmatik2Pro, other devices are also supported but were not properly tested.

BitBox
Bosch MG1/MD1 BENCH

[ECUtools]

⭐️ Happy New Year from ECUTools and news on our working hours during holidays! ⭐️

⭐️ ECUTools team wishes you happy New Year and great winter holidays!

Thank you so much for choosing us in this challenging year. We apprecciate your involvement with Chip-Tuning and wish you all the best today and in the upcoming 2021! This year as given us a lot, we have expanded our range or products and followed the updates of the tools we already had.

✅ For your convenience we do work during the winter holidays. The activations will be done as usual, however, there may be some delays. As for sending and delivering the tools, EMS will accept packages on January 3rd, 4th and 6th, whereas DHL will be sending parcels after January 11th.

[ECUtools]

❗️ FLEX version 5.9.0.0: OBD, Bootloader and BENCH solutions for ECU and TCU ❗️

Magicmotorsport releases new solutions for OBD programming of Bosch MED9.1.2 engine control units installed on Audi (R8 4.2 V and Lamborghini (Gallardo 5.2).
FLEX is also able to read and write the Secondary CPU (if equipped) on all GETRAG 7DCT, BOSCH 9G-Tronic and ZF 8HP mechatronics.

➡️ New protocols added:

✅ AUDI BOSCH MED9.1.2 OBD: Read/Write/Checksum Maps
✅ AUDI SIMOS 16.1 BOOT: Read/Write/Checksum Internal Flash ; Read/Write IntEeprom; Full Backup
✅ BUICK BOSCH ME9.6.1 GM BENCH: Read/Write/Checksum Internal Flash; Read/Write/Checksum External Flash; Read/Write External Eprom; Full Backup
✅ CADILLAC BOSCH ME9.6.1 GM BENCH: Read/Write/Checksum Internal Flash; Read/Write/Checksum External Flash; Read/Write External Eprom; Full Backup
✅ FIAT BOSCH MD1CS069 BENCH: Read/Write/Checksum Internal Flash; Read/Write/Internal Eeprom; Full Backup
✅ GMC BOSCH ME9.6.1 GM BENCH: Read/Write/Checksum Internal Flash; Read/Write/Checksum External Flash; Read/Write External Eprom; Full Backup
✅ HYUNDAI KEFICO CPGDSH1.26.1 BOOT: Read/Write/Checksum/Internal Flash; Read/Write IntEeprom; Full Backup
✅ KIA KEFICO CPGDSH1.26.1 BOOT: Read/Write/Internal Flash; Read/Write IntEeprom; Full Backup
✅ LAMBORGHINI BOSCH MED9.1.2 OBD: Read/Write/Checksum Maps
✅ NISSAN BOSCH EDC16C41 BENCH: Read/Write/Checksum Internal Flash; Read/Write/Checksum External Flash; Read/Write External Eprom; Full Backup
✅ NISSAN BOSCH EDC17C45 BOOT: Read/Write/Checksum Internal Flash; Read/Write/Internal Eeprom; Full Backup
✅ OPEL BOSCH ME9.6.1 GM BENCH: Read/Write/Checksum Internal Flash; Read/Write/Checksum External FLash; Read/Write External Eprom; Full Backup
✅ PORSCHE Continental SDI 7 BOOT: Read/Write Checksum Internal Flash; Read/Write External Eeprom; Full Backup
✅ PORSCHE Continental SDI 8 BOOT: Read/Write Checksum Internal Flash; Read/Write External Eeprom; Full Backup
✅ SAAB BOSCH ME9.6.1 GM BENCH: Read/Write/Checksum Internal Flash; Read/Write/Checksum External FLash; Read/Write External Eprom; Full Backup
✅ VINFAST BOSCH MG1CS088 BENCH: Read/Write Checksum Internal Flash; Read/Write Internal Eeprom; Full Backup
✅ Volkswagen (VW) BOSCH Simos 10.14A BOOT: Read/Write/Checksum Internal Flash; Read/Write IntEeprom; Full Backup
✅ Volkswagen (VW) SIMOS 16.1 BOOT: Read/Write/Checksum Internal Flash; Read/Write IntEeprom; Full Backup

➡️ Bug Fixes:
✅ Fixed issue with writing of external flash in BOSCH ME9.0 FORD & VOLVO
✅ Fixed no action error with 8GMF and TRW EMS2 protocol.
✅ VOLVO ME7.0 fixed writing issue in BENCH mode.
✅ Fixed BDM Internal Flash reading on different MCU types ( MPC55x )

➡️ Software improvements:
✅ Added support for BOSCH 9G-Tronic; ZF 8HP and GETRAG 7DCT SecondaryCPU ( The adaptation after clone in not needed anymore with any TCUs versions )
✅ Improved OBD writing on FORD BOSCH MEDG17.0
✅ Improved autodetection for Marelli Service Mode

❗️ [ IMPORTANT! ] After this version, you will need to update your FLEX to the latest Software version 5.9.0.0. SW versions prior to 5.9.0.0 will no longer allow the use of the BENCH 4090000 protocol. If you have an older version of the software, FLEX will show the following message during the “Connect” option: “Internal server error. Contact technical support. Failed to connect.”

⭐️ Flex Master
⭐️ Flex Slave

[ECUtools]

❗️ Remap in Bootmode the brand-new ATV just released in K-TAG ❗️

✅ Reading, Writing and Cloning in Bootmode

The brand-new ZForce 1000 Sport owns a 1000 4-stroke twin-cylinder engine, controlled by the ECU Bosch ME17.U.6 micro TC128.

✅ Bosch ME17.U.6
CF Moto ZFORCE 1000 - ME17.U.6 TC1728

✅ Bosch ME17.8.8
Saic MG3 - ME17.8.8 TC1728

⭐️ K-TAG Master
⭐️ K-TAG Slave

[ECUtools]

❗️ OBDLink adapters are already in stock and ready for ordering! ❗️

✅ OBDLink is an easy-to-use, inexpensive, hacker-proof, lightning-fast Bluetooth OBD adapter that can turn your smartphone, tablet, laptop, or netbook into a sophisticated diagnostic scan tool, trip computer, and real-time performance monitor!

• OBDLink MX+
• OBDLink СX+
• OBDLink EX
• OBDLink LX
• OBDLink SX USB

[ECUtools]

❗️ K-TAG Bootmode: read, writing and cloning of BOSCH ME17.U.6 ❗️

⭐️ Bosch ME17.U.6 equipped on the brand new Side by Side of the CF Motorcycle: Uforce 1000

➡️ Bosch ME17.U.6: RD, WR, Clone
✅ CF Moto UFORCE 1000 - Bosch ME17.U.6

⭐️ Reading and writing through OBD for KESSv2 247 protocol: ECU Keihin RBW

➡️ Keihin RBW: RD, WR
✅ Husqvarna Enduro 701 Enduro - Keihin RBW
✅ Husqvarna Supermoto 701 Supermoto - Keihin RBW
✅ Husqvarna Vitpilen 701 - Keihin RBW

⭐️ K-TAG Master
⭐️ K-TAG Slave

[ECUtools]

❗️ K-TAG Service Mode: new protocol to work on the ECUS Bosch MG1CP007 ❗️

✅ Remap the new Porsche 992 without opening the ECU with K-TAG

✅ Reading
✅ Writing

➡️ Bosch MG1CP007
Porsche 911 Carrera 992 3.0 V6 24v Turbo 8AT - Bosch MG1CP007 TC299TP

✅ A protocol for SAAB equipped with ECU Bosch EDC17CP21 was also introduced

➡️ Bosch EDC17CP21
Saab 95 2.0 16v TTiD - Bosch EDC17C19 TC1792
Saab 95 2.0 TiD 6AT - Bosch EDC17CP21 TC1792
Saab 95 2.0 TiD 6MT - Bosch EDC17CP21 TC1792
Saab 95 2.0 TTiD 6AT - Bosch EDC17CP21 TC1792
Saab 95 2.0 TTiD 6MT - Bosch EDC17CP21 TC1792

⭐️ K-TAG Master
⭐️ K-TAG Slave

[ECUtools]

❗️ I/O Terminal Update! ❗️

➡️ I/O TERMINAL MULTI TOOL V46 has been released!

✅ FIAT BSI2 has been updated (FIAT BSI CONTINENTAL MPC5606 PFLASH & DFLASH R/W)
✅ VOLVO CEM P3 platform license (VOLVOCEMLIC000001) updated (VOLVO LEAR SPC560B60/B64 - PFLASH+DFLASH R/W+EEPROM 95320 EEPROM R/W by CAN (OBD)
(Pincode extraction from dump option available).
✅ FORDBCM license updated (added support for FORD RANGER BCM made by LEAR with 9S12XEP76.

➡️ Updated Ford BCM, Fiat BSI wiring diagrams documents.

I/O Terminal

[ECUtools]

⭐️❗️ Chiploader WINTER SALE! ❗️

⭐️ Till January 4th — 15% to 35% discounts on ALL modules:

➡️ 15% OFF any ChipLoader module: use the promo code ⭐️chiploader152020⭐️ to get your 15% discount;
➡️ 35% OFF any ChipLoaderNG module: use the promo code ⭐️chiploaderng352020⭐️ to get your 35% discount!

⭐️ ChipLoader
⭐️ ChipLoaderNG

[ECUtools]

❗ Autotuner Update for Renault & Mercedes and a Datalogging Solution! ❗

✅ Bosch
EDC17C11
EDC17C42 *
EDC17C66
EDC17C84 *
EDC17CP10
EDC17CP19
EDC17CP46
EDC17CP57
EDC17CP58
MD1CS006
MD1CP001
ME17.9.20
MED17.7.1
MED17.7.2
MED17.7.3
MED17.7.3.1
MED17.7.5
MED17.7.7
* Renault only

✅ Siemens
EMS3110
EMS3125
EMS3150
EMS3155

✅ Delphi
CRD3.30
CRD3.7A
CRD3.6
CRD3.59
CRD3.10
CRD3.20
CRD3.40
CRD3.50
CRD3.58
CRD3.2R
CRD3.60
CRD3.E1
CRD3.F1

✅ Continental
SID307
SID309
SID310

✅ Hitachi
BED434

✅ Valeo
V50.1

⭐️ Autotuner Master
⭐️ Autotuner Slave

[ECUtools]

❗️ Combiloader Update: EMS210x Ford J2534 ❗️

The module works with CombiLoader version 2.15.
It supports software and map area reading/writing of EMS2101 (Test) / 2102 (Test) / 2103 ECUs in:
✅ Ford Fiesta and Mondeo 4 vehicles 1.25L, 1.4L, 1.6L.

⭐️ EMS210x Ford J2534
⭐️ CombiLoader

[ECUtools]

❗️ BitBox 3.3.7 rev. Update: A New Module and More! ❗️

☑️ New modules:

➡️ Ford Continental Petrol CAN has been released with following families:

✅ Ford Continental EMS2204 TC1738 2MB CAN - virtual reading/writing/checksums calculation and VBF to BIN decryption feature
✅ Ford Continental EMS2205 TC1766 1.46MB CAN - virtual reading/writing/checksums calculation and VBF to BIN decryption feature
✅ Ford Continental EMS2208 TC1767 2MB CAN - virtual reading/writing/checksums calculation and VBF to BIN decryption feature
✅ Ford Continental EMS2211 TC1738 2MB CAN - virtual reading/writing/checksums calculation and VBF to BIN decryption feature
✅ Ford Continental EMS2214/EMS2215 TC1738 2MB CAN - virtual reading/writing/checksums calculation and VBF to BIN decryption feature
✅ Ford Continental EMS24xx TC1791 4MB CAN - virtual reading/writing/checksums calculation and VBF to BIN decryption feature
✅ Ford Continental EMS2510/EMS2511 TC1791 4MB CAN - virtual reading/writing/checksums calculation and VBF to BIN decryption feature

⭐️ All families support writing with update and you can decrypt VBF file to BIN by using special button in BitBox application. For each family VBF will be decrypted and checked for compatibility with the selected family!

➡️ Fixes and improvements:

✅ Bosch MG1/MD1 Bench added some new ECU types:
- MD1CE100 (MAN, KAMAZ)
- MD1CP006 (Ford)
- MD1CS012 (Kia/Hyundai)
- and other ECU types which required other TSW.

❗️ ECUs later than 06/2020 are still not supported due to the new authentication system. For now the newest BMW, Kia/Hyundai and BRP Rotax have been found with this issue.
☑️ Master/Slave interface fixes
☑️ UI minor Fixes

Ford Continental Petrol CAN
BitBox

[ECUtools]

❗️ ECULite Update: v1.97.016 ❗️

⭐️ What's new:

✅ Denso 1.6
Defination file for SW:

89663-02G40-

✅ Denso 2.0
Defination file for SW

89663-06460-
89663-06E10-
89663-42601-
89663-42B82-

✅ Denso 2.4
Defination file for SW

89663-06431-
89663-42490-
89663-42544-
89663-42D70-

✅ Denso 3.5
Defination file for SW

89663-48A80-

✅ Toyota Denso DTC
Defination file for SW:

89663-05870-
89663-06G23-
89663-0T090-
89663-0Z191-
89663-30E01-
89663-33841-
89663-33G80-
89663-33L20-
89663-6A711-

✅ Subaru Denso DTC
Defination file for SW:

D2TB101L
A2UH000A
E2TB101J

✅ A new module Subaru Denso 2.0
Software versions:

E2UD001E
E2VF211G
E2VF241G
EP5D003R
EP5F300s
EP5F300t
EP5G601B
EP5L000p

✅ A new module Kamaz EDC7UC31 DTC
Software Versions:

702V141_740.60-360-290812_5460-4010142-01
702V141_740.60-360-290812_6460-4010122-01
702V141_740.602-360-170214_5350-4010121-01
702V141_740.602-360-170214_6460-4010122-01
702V141_740.61-320-290812_5460-4010142-01
702V141_740.61-320-290812_6460-4010122-01
702V141_740.612-320-170214_6460-4010122-01
702V141_740.62-280-290812_5460-4010142-01
702V141_740.62-280-290812_6460-4010122-01
702V141_740.622-280-170214_5350-4010121-01
702V141_740.622-280-170214_65111-4010121-01
702V141_740.622-280-260815_5350-4010121
702V141_740.622-280-280915_65111-4010121
702V141_740.63-400-290812_5460-4010142-01
702V141_740.63-400-290812_6460-4010122-01
702V141_740.632-400-170214_65111-4010121-01
702V141_740.632-400-170214_6560-4010121-021
702V141_740.642-420-170214_65111-4010121-01
702V141_740.652-260-170214_5350-4010121-01
702V141_740.662-300-170214_65111-4010121-01
702V141_740.662-300-170214_65111-4010121-02
702V141_740.662-300-290812_5350-4010121
702V141_740.73-400-070714_6460-4010122-01
702V141_740.73-400-070714_6460-4010141-01
702V141_740.73-400-070714_6460-4010141-02
702V141_740.73-400-290812_6460-4010122-01

986702V310_740.705-300-020418_5350-4010010-16_OFF_FAN_OFF_EFU 986702V310_740.705-300-020418_65115-4010010-16
986702V310_740.705-300-190618_5350-4010010-16_OFF_FAN_ON_EFU_20-06-18
986702V310_740.705-300-190618_65115-4010010-16_OFF_FAN_OFF_EFU_20-06-18
986702V310_740.705-300-190618_65115-4010010-16_OFF_FAN_ON_EFU_20-06-18
986702V310_740.705-300-190618_65115-4010010-16_ON_FAN_ON_EFU_20-06-18
986702V310_740.735-400-020418_5350-4010010-16_FAN

⭐️ ECULite

[ECUtools]

⭐️❗️ MDflasher PRE-ORDER - Licence 66 - Renault/VAZ ABS/ESP BOSCH OBDII ❗️⭐️

➡️ This module allows working via OBDII connector via CAN-bus with the control units ABS/ESP BOSCH 9.0–9.1 with MC TMS470, TMS570 and EEPROM 95128/95320/95640, equipped on the following vehicles: Renault, Dacia, Nissan, VAZ, 2014+

➡️ Module supports:

✅ ECU Identification
✅ Error Reading/Clearing
✅ EEPROM Reading / Writing
✅ Reading FullFlash / Writing calibration and software area
✅ VIN data changing
✅ ECU reset
✅ Backups are saved automatically to the «Backup» folder. Even if you have accidentally deleted the file after reading, you can find it in the folder with the date and time of creation in the title.

➡️ EEPROM reading / writing takes from 7 to 15 seconds, depending on the processor and the adapter used. This module does not calculate checksums.

✅ Approximate vehicle list:
Dacia Duster
Dacia Logan
Dacia Sandero
Lada Vesta
Lada X-Ray
Nissan Terrano
Renault Duster
Renault Logan
Renault Sandero
Renault ClioIV
Renault Captur
Renault Kaptur

✅ Checked ECUs:
TMS470+95320 — 2014
TMS470+95320 — 2015
TMS570+95128 — 2016
TMS570+95128 — 2017
TMS570+95128 — 2018
TMS570+95128 — 2019
TMS570+95128 — 2020
TMS570+95320 — 2017
TMS570+95640 — 2016

❗️ Attention! The operation of this module is completely safe, in case of loss of communication during recording, for example, if the battery on a laptop or the battery on a car runs out, it is enough to repeat the recording procedure and the operation will be restored.

❗️ The activation files will be sent within a week after 03.03.2021 ❗️

MD flasher
License 66

[ECUtools]

❗️ K-TAG Update: Full reading and writing for Continental M4D Ducati and Bosch MSE2 KTM ❗️

➡️ With K-TAG you can read, write, and clone without opening the ECU of the new Ducati Panigale and Streetfighter, in addition to KTM Duke and Husqvarna Svartpilen.

➡️ Continental M4D Ducati: Reading, Writing and Cloning
✅ Ducati Streetfighter Streetfighter 1100 V4 - Continental M4D
✅ Ducati Streetfighter Streetfighter 1100 V4S - Continental M4D
✅ Ducati Superbike 1000 Panigale V4 R - Continental M4D
✅ Ducati Superbike 1100 Panigale V4 - Continental M4D
✅ Ducati Superbike 1100 Panigale V4S - Continental M4D
✅ Ducati Superbike 955 Panigale V2 - Continental M4D

➡️ Bosch MSE2 SPC572: Reading, Writing and Cloning
✅ Bajaj Dominar Dominar 400 - Bosch MSE2 SPC572
✅ Husqvarna Svartpilen Svartpilen 401 - Bosch MSE2 SPC572
✅ KTM Duke 200 Duke - Bosch MSE2 SPC572
✅ KTM Duke 200 Duke ABS - Bosch MSE2 SPC572
✅ KTM Duke 390 Duke - Bosch MSE2 SPC572
✅ KTM Duke 390 Duke ABS - Bosch MSE2 SPC572

⭐️ K-TAG Master
⭐️ K-TAG Slave

[ECUtools]

❗️Two new MD Flasher licenses are up for pre-order!❗️

The modules allow working via OBD or on the bench with SRS ECUs with TriCore Aurix TC2xx in Hyundai/Kia [81] and Nissan/Infinity [82].

➡️ The module supports:

✅ Identification
✅ Error reading
✅ Error erasing
✅ DFLASH reading
✅ DFLASH writing

❗️The activation files will be sent after 30.08.2021

Not all software versions are supported. If the software versions are not supported by this license, please contact the support on this portal. Please also include a photo of the ECU and the full information regarding CFLASH, DFLASH, UCB, OTP, etc.

➡️ PRE-ORDER - Licence 81 - Hyundai/Kia SRS TriCore Aurix TC2xx OBDII
➡️ PRE-ORDER - Licence 82 - Nissan/Infinity SRS TriCore Aurix TC2xx OBDII