Chip Tuning Tools
MS Tuningfiles

Results 1 to 8 of 8

Thread: Chip Tuning Tools

  1. #1
    Junior Member OEM ECU
    Join Date
    Nov 2020
    Location
    Russia, Vologda, Leningradskaya street, 71
    Posts
    8

    Default Chip Tuning Tools

    F  Dynochiptuning files
    Hello! We are ECUTools - an online shop specialising in licensed professional chip tuning and diagnostics tools. We sell only original tools by the leading manufacturers of chip tuning and diagnostics solutions.

    The most popular items are:

    - Openport 2.0
    Tuning tool hardware that is capable of communicating with a most OBDII compliant vehicles using a standard J2534 interface. Combined with EcuFlash software, the OpenPort 2.0 is capable of reflashing a large number of newer Subaru and Mitsubishi vehicles.

    - Toyota Lexus ECU Flasher
    A multipurpose programmer for Denso and Fujitsu Ten ECUs with NEC processors installed in TOYOTA, LEXUS and SCION vehicles with petrol and diesel engines through JTAG interface. It is a unique solution in the chip tuning world. Now also writing through OBD-II via CAN-bus is available.

    - PCM
    The PCM Flash is an integrated software solution intended for engine and automatic transmission ECUs of Volkswagen, Skoda, Ford, Mazda, Nissan, Subaru, Mitsubishi, Renault, Honda and Toyota vehicles.

    - ММС
    MMC Flasher is a multi-purpose loader intended for Hyundai, Kia, Mitsubishi, Subaru, Mazda, Ford, Nissan, Infiniti, Honda chip-tuning

    - BitEdit
    BitEdit is a modern software for editing automative ECU calibrations and allows to change most dynamic options of the engine. The software works in the following way: you open an ECU flash file, it proceeds with identification and then it shows list of calibrations that can be edited. BitEdit editor is good for professionals and newbie tuners.

    - BitBox
    BitBox is an emerging software package that allows identification, reading and writing internal flash memory of control units for various purposes. The tools works with the ECU via the CAN or K-line data interfaces using any J2534 Pass-thru adapter. It supports a number of ECUs, including those in Korean vehicles, and extreme vehicles with Rotax engines.

    - Combiloader
    CombiLoader is a software and hardware system for reading and writing flash and eeprom in the ECUs installed in various vehicles including Transtron Isuzu, Delphi MT92 (Great Wall), Valeo V46 and Delphi DCM3.7. It provides writing of the map area without dismantling an ECU from the vehicle by means of the diagnostic writing method for all the ECUs when possible.

    We accept payment via PayPal and Western Union and ship all over the world by EMS and DHL.

    We are ready to answer all your questions. Contact us via email or PM.
    ☑️ WhatsApp: +7 (921) 539-93-54

  2. DOT Engineering
  3. #2
    Junior Member OEM ECU
    Join Date
    Nov 2020
    Location
    Russia, Vologda, Leningradskaya street, 71
    Posts
    8

    Default

    ❗️ BitBox 3.3.4 rev. 1 Update ❗️

    New modules: Ford Continental Diesel CAN introduced with the following families:

    ✅ FID255: Ford Continental SID208 TC1797 CAN (FULL OBD) - reading/writing/checksums calculation
    ✅ FID256: Ford Continental SID211 TC1791S CAN (FULL OBD) - reading/writing/checksums calculation
    ✅ FID259: Ford Continental SID206 MPC563+Ext.Flash - reading/writing/checksums calculation
    ✅ FID261: Ford Continental SID803A MPC561+Ext.Flash - reading/writing checksums calculation

    Improvements and fixes:

    ☑️ Fixed some errors for Kia/Hyundai SIM2K-260 for reading/writing when password is already known
    ☑️ Fixed timeout error with erasing memory on MB Delphi CRD2.XX
    ☑️ Fixes for some ECU types for China Delphi DCM3.7AP during writing on vehicle

    ⭐️ For prices please refer to the links below:

    BitBox
    Ford Continental Diesel CAN
    ☑️ WhatsApp: +7 (921) 539-93-54

  4. #3
    Junior Member OEM ECU
    Join Date
    Nov 2020
    Location
    Russia, Vologda, Leningradskaya street, 71
    Posts
    8

    Default

    ❗️ FLEX version 5.6.0.0 is here! ❗️

    ➡️ BENCH and BOOT solutions for Kia and Hyundai

    Works on the Bench with the Kefico CPEGD and CPGDSH ECUs installed on Kia and Hyundai, on models such as Stonic 1.0 T-GDI 2017 and i30 1.6 T-GDI 2017.

    ✅ Reading and Writing the complete contents of the Internal Flash and Internal EEPROM
    ✅ ECU opening is not requited

    Also new are the Bootloader protocols for programming BOSCH KEFICO KME1.9.3.1 and BOSCH EDC15C13 engine control units.

    ☑️ Check the new protocols here

    As well as some bug fixes and software improvements.

    ⭐️ FLEX Master
    ⭐️ FLEX Slave
    ☑️ WhatsApp: +7 (921) 539-93-54

  5. #4
    Junior Member OEM ECU
    Join Date
    Nov 2020
    Location
    Russia, Vologda, Leningradskaya street, 71
    Posts
    8

    Default

    ❗️ K-TAG: new protocols for Bosch EDC16 in Service Mode! ❗️

    ✅ Reading and Writing
    ✅ Cloning
    ✅ Without opening the ECU Bosch EDC16

    In addition to the three new protocols dedicated to EDC16, there now is the protocol in Boot for Bosch EDC15.

    ➡️ Bosch EDC16C3, Bosch EDC16C7
    ➡️ Bosch EDC16U31
    ➡️ Bosch EDC16C39
    ➡️ Bosch EDC15C7 ST10C167
    Here

    Full vehicle list

    ⭐️ K-Tag Master
    ⭐️ K-Tag Slave
    ☑️ WhatsApp: +7 (921) 539-93-54

  6. #5
    Junior Member OEM ECU
    Join Date
    Nov 2020
    Location
    Russia, Vologda, Leningradskaya street, 71
    Posts
    8

    Default

    ⭐️❗️❗️ ECULite - a brand new item in our stock for Toyotas, Mitsubishi and Volkswagen ❗️❗️⭐️

    ECULite is modern and user-friendly software for editing the map area of various ECUs. This program allows you to edit the calibrations of the vehicle files to perform basic chip tuning.

    The following maps are available:
    ✅ spark advance
    ✅ DTC detection mask of the catalytic converter system malfunction
    ✅ exhaust gas recirculation (EGR) valve
    ✅ oxygen sensor
    ✅ throttle valve
    ✅ optimum torque
    ✅ torque request, etc.

    For Diesel vehicles the following maps are available:
    ✅ boost pressure
    ✅ torque request
    ✅ injection start phases
    ✅ injection time
    ✅ fuel pressure
    ✅ exhaust gas recirculation valve (EGR)
    ✅ Error Detection Mask etc.

    ⭐️ Specifics:
    - User-friendly interface with the possibility of displaying calibrations in tables, 3D and 2D charts
    - Display of error mask and calibration constants
    - Two files comparison function with the ability to copy calibrations from the compared file
    - Calibration editing, setting of the absolute value and changing the percentage ratio
    - Modular design of calibration description maps
    - USB dongle

    ❗️ Please note:
    It is best to upload files to Toyota Denso and Mitsubishi Melco 3 using PCMflash. This flasher does checksum corrections before the writing. The ECULite editor does not make checksum corrections for the above ECU, as it is not necessary.

    It is recommended that the file loading into Bosch EDC16U1 (31/34) ECUs should be done using Combiloader or Kess v2. The Kess v2 does checksum corrections before they are written in the ECU. In the near future Combiloader will also be able to do checksum corrections.

    ⭐️ ECULite
    ☑️ WhatsApp: +7 (921) 539-93-54

  7. #6
    Junior Member OEM ECU
    Join Date
    Nov 2020
    Location
    Russia, Vologda, Leningradskaya street, 71
    Posts
    8

    Default

    ❗️ PRE-SALE License 35 - Hyundai-Kia MB90F025(26)/MB91F037(047)+93С66 OBDII ❗️

    The module allows to work with dashboards via OBD or on the bench using a J2534 device.

    Available functions:

    ✅ Mileage reading/writing
    ✅ 93C66 EEPROM reading/writing
    Reading/writing take 12 minutes depending on the J2534 device.

    ☑️ Supported J2534 devices:
    - DrewTech Mongoose
    - DrewTech CarDAQ
    - Scanmatik 2 PRO
    - SMS DiaLink
    - Chipsoft J2534 Lite (with disabled OpenPort2 support)
    - Chipsoft J2534 Mid (with disabled OpenPort2 support)
    - Chipsoft J2534 Pro (with disabled OpenPort2 support)

    ❗️ Openport 2.0 is NOT supported!

    Suggested car list
    :

    ✅ Hyundai Equus 20132015 Full TFT LCD(Fujitsu MB91F037+93C66)
    ✅ Hyundai Centennial 20132015 Full TFT LCD(Fujitsu MB91F037+93C66)
    ✅ Kia Cadenza 2013_2016 7 TFT LCD(Fujitsu MB91F037+93C66)
    ✅ Kia Carens 20122016 Small LCD(Fujitsu MB90F026+93C66)
    ✅ Kia Carens 20122016 SuperVision TFT LCD(Fujitsu MB91F037+93C66)
    ✅ Kia Carnival 2014+ Small segment LCD(Fujitsu MB91F047+93C66)
    ✅ Kia Sedona 2014+ Small segment LCD(Fujitsu MB91F047+93C66)
    ✅ Kia Cerato 20122016 Segment LCD(Fujitsu MB90F025+93C66)
    ✅ Kia K3 20122016 Segment LCD(Fujitsu MB90F025+93C66)
    ✅ Kia Forte 20122016 Segment LCD(Fujitsu MB90F025+93C66)
    ✅ Kia Cerato 20122017 SuperVision Monochrome(Fujitsu MB91F037+93C66)
    ✅ Kia K3 20122017 SuperVision Monochrome(Fujitsu MB91F037+93C66)
    ✅ Kia Forte 20122017 SuperVision Monochrome(Fujitsu MB91F037+93C66)
    ✅ Kia Cerato 20122017 SuperVision TFT LCD(Fujitsu MB91F037+93C66)
    ✅ Kia K3 20122017 SuperVision TFT LCD(Fujitsu MB91F037+93C66)
    ✅ Kia Forte 20122017 SuperVision TFT LCD(Fujitsu MB91F037+93C66)
    ✅ Kia Quoris 20122014 SuperVision Full TFT LCD(Fujitsu MB91F037+93C66)
    ✅ Kia Quoris 20122014 SuperVision TFT LCD(Fujitsu MB91F037+93C66)
    ✅ Kia Quoris 20152017 SuperVision Full TFT LCD(Fujitsu MB91F037+93C66)

    ❗️ The license will be available after 24.11.2020

    For price and information please refer to the links below:

    ⭐️ MD flasher
    ⭐️ License 35 - Hyundai-Kia_MB90F025(26)/MB91F037(047)+93С66_OBDII
    ☑️ WhatsApp: +7 (921) 539-93-54

  8. #7
    Junior Member OEM ECU
    Join Date
    Nov 2020
    Location
    Russia, Vologda, Leningradskaya street, 71
    Posts
    8

    Default

    ⭐️ New Autotuner Module for Land Rover (JLR) 3.0 MHEV ⭐️

    ECU: Bosch MG1CS028

    ➡️ Autotuner is now able to perform the following operations:

    ✅ Bench Read
    ✅ Bench Write

    On the following vehicles:

    ☑️ Jaguar 3.0 P340 MHEV - Bosch MG1CS028
    ☑️ Land Rover 3.0 P340 MHEV - Bosch MG1CS028
    ☑️ Land Rover 3.0 P360 MHEV - Bosch MG1CS028
    ☑️ Land Rover 3.0 P400 MHEV - Bosch MG1CS028

    Autotuner Master
    Autotuner Slave
    ☑️ WhatsApp: +7 (921) 539-93-54

  9. #8
    Junior Member OEM ECU
    Join Date
    Nov 2020
    Location
    Russia, Vologda, Leningradskaya street, 71
    Posts
    8

    Default

    ❗️ KESSv2 presents Diesel Toyota GEN III ❗️

    ✅ Real reading and writing via OBD for the new Hilux and Land Cruiser equipped on the DENSO ECU and the microcontroller R7F701202 in the 748 KESSv2 protocol.

    If you already have the 748 protocol, everything is included: real reading and writing through OBD with KESSv2.

    ➡️ Denso R7F701202

    ☑️ Toyota Hilux 2.4 16V VTN
    ☑️ Toyota Hilux 2.8 16V VTN
    ☑️ Toyota Land Cruiser 2.8 16V D-4D VTN

    ✅ The support the new Land Rover 5.0 V8 SVR and SCV8 equipped with Bosch MED 17.8.32 has also been added!

    If you already have the 706 protocol, you can immediately start working, even with an expired subscription.

    ➡️ BOSCH MED17.8.32

    ☑️ Land Rover L494 5.0 V8 SCV8
    ☑️ Land Rover L494 5.0 V8 SVR

    ⭐️ KESSv2 Master
    ⭐️ KESSv2 Slave
    ☑️ WhatsApp: +7 (921) 539-93-54

  10. Dyno Chiptuningfiles

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •