Chip Tuning Tools

[ECUtools]

❗️ FLEX version 5.6.0.0 is here! ❗️

➡️ BENCH and BOOT solutions for Kia and Hyundai

Works on the Bench with the Kefico CPEGD and CPGDSH ECUs installed on Kia and Hyundai, on models such as Stonic 1.0 T-GDI 2017 and i30 1.6 T-GDI 2017.

✅ Reading and Writing the complete contents of the Internal Flash and Internal EEPROM
✅ ECU opening is not requited

Also new are the Bootloader protocols for programming BOSCH KEFICO KME1.9.3.1 and BOSCH EDC15C13 engine control units.

☑️ Check the new protocols here

As well as some bug fixes and software improvements.

⭐️ FLEX Master
⭐️ FLEX Slave

[ECUtools]

❗️ K-TAG: new protocols for Bosch EDC16 in Service Mode! ❗️

✅ Reading and Writing
✅ Cloning
✅ Without opening the ECU Bosch EDC16

In addition to the three new protocols dedicated to EDC16, there now is the protocol in Boot for Bosch EDC15.

➡️ Bosch EDC16C3, Bosch EDC16C7
➡️ Bosch EDC16U31
➡️ Bosch EDC16C39
➡️ Bosch EDC15C7 ST10C167
Here

✅ Full vehicle list

⭐️ K-Tag Master
⭐️ K-Tag Slave

[ECUtools]

⭐️❗️❗️ ECULite - a brand new item in our stock for Toyotas, Mitsubishi and Volkswagen ❗️❗️⭐️

ECULite is modern and user-friendly software for editing the map area of various ECUs. This program allows you to edit the calibrations of the vehicle files to perform basic chip tuning.

The following maps are available:
✅ spark advance
✅ DTC detection mask of the catalytic converter system malfunction
✅ exhaust gas recirculation (EGR) valve
✅ oxygen sensor
✅ throttle valve
✅ optimum torque
✅ torque request, etc.

For Diesel vehicles the following maps are available:
✅ boost pressure
✅ torque request
✅ injection start phases
✅ injection time
✅ fuel pressure
✅ exhaust gas recirculation valve (EGR)
✅ Error Detection Mask etc.

⭐️ Specifics:
- User-friendly interface with the possibility of displaying calibrations in tables, 3D and 2D charts
- Display of error mask and calibration constants
- Two files comparison function with the ability to copy calibrations from the compared file
- Calibration editing, setting of the absolute value and changing the percentage ratio
- Modular design of calibration description maps
- USB dongle

❗️ Please note:
It is best to upload files to Toyota Denso and Mitsubishi Melco 3 using PCMflash. This flasher does checksum corrections before the writing. The ECULite editor does not make checksum corrections for the above ECU, as it is not necessary.

It is recommended that the file loading into Bosch EDC16U1 (31/34) ECUs should be done using Combiloader or Kess v2. The Kess v2 does checksum corrections before they are written in the ECU. In the near future Combiloader will also be able to do checksum corrections.

⭐️ ECULite

[ECUtools]

❗️ PRE-SALE License 35 - Hyundai-Kia MB90F025(26)/MB91F037(047)+93С66 OBDII ❗️

The module allows to work with dashboards via OBD or on the bench using a J2534 device.

Available functions:

✅ Mileage reading/writing
✅ 93C66 EEPROM reading/writing
Reading/writing take 1–2 minutes depending on the J2534 device.

☑️ Supported J2534 devices:
- DrewTech Mongoose
- DrewTech CarDAQ
- Scanmatik 2 PRO
- SMS — DiaLink
- Chipsoft J2534 Lite (with disabled OpenPort2 support)
- Chipsoft J2534 Mid (with disabled OpenPort2 support)
- Chipsoft J2534 Pro (with disabled OpenPort2 support)

❗️ Openport 2.0 is NOT supported!

Suggested car list:

✅ Hyundai Equus 2013–2015 Full TFT LCD(Fujitsu MB91F037+93C66)
✅ Hyundai Centennial 2013–2015 Full TFT LCD(Fujitsu MB91F037+93C66)
✅ Kia Cadenza 2013_2016 7» TFT LCD(Fujitsu MB91F037+93C66)
✅ Kia Carens 2012–2016 Small LCD(Fujitsu MB90F026+93C66)
✅ Kia Carens 2012–2016 SuperVision TFT LCD(Fujitsu MB91F037+93C66)
✅ Kia Carnival 2014+ Small segment LCD(Fujitsu MB91F047+93C66)
✅ Kia Sedona 2014+ Small segment LCD(Fujitsu MB91F047+93C66)
✅ Kia Cerato 2012–2016 Segment LCD(Fujitsu MB90F025+93C66)
✅ Kia K3 2012–2016 Segment LCD(Fujitsu MB90F025+93C66)
✅ Kia Forte 2012–2016 Segment LCD(Fujitsu MB90F025+93C66)
✅ Kia Cerato 2012–2017 SuperVision Monochrome(Fujitsu MB91F037+93C66)
✅ Kia K3 2012–2017 SuperVision Monochrome(Fujitsu MB91F037+93C66)
✅ Kia Forte 2012–2017 SuperVision Monochrome(Fujitsu MB91F037+93C66)
✅ Kia Cerato 2012–2017 SuperVision TFT LCD(Fujitsu MB91F037+93C66)
✅ Kia K3 2012–2017 SuperVision TFT LCD(Fujitsu MB91F037+93C66)
✅ Kia Forte 2012–2017 SuperVision TFT LCD(Fujitsu MB91F037+93C66)
✅ Kia Quoris 2012–2014 SuperVision Full TFT LCD(Fujitsu MB91F037+93C66)
✅ Kia Quoris 2012–2014 SuperVision TFT LCD(Fujitsu MB91F037+93C66)
✅ Kia Quoris 2015–2017 SuperVision Full TFT LCD(Fujitsu MB91F037+93C66)

❗️ The license will be available after 24.11.2020

For price and information please refer to the links below:

⭐️ MD flasher
⭐️ License 35 - Hyundai-Kia_MB90F025(26)/MB91F037(047)+93С66_OBDII