Chip Tuning Tools

[ECUtools]

➡️❗️ PCMFlash WINTER SALE ❗️⬅️

⭐️ December 21st - 28th - 10%-20% discounts on ALL modules (the purchased modules must be for ONE dongle):

⭐️❗️10% OFF❗️ any module: use the promo code ➡️2020pcmflash10⬅️ to get your 10% discount.

If you buy for ❗️more than 362 USD❗️, use the promo code ➡️2020pcmflash15⬅️ to get your 15% discount.

If you buy for ❗️more than 724 USD❗️, use the promo code ➡️2020pcmflash20⬅️ to get your 20% discount.

PCMflash

[ECUtools]

⭐️❗️ BitBox/BitEdit WINTER SALE! ❗️⭐️

➡️ Till December 31st 15% OFF ALL BitBox/BitEdit modules!

❗️ Use the promo code ⭐️bitboxsale2020⭐️ to get this 15% discount.

⭐️ BitBox
⭐️ BitEdit

[ECUtools]

⭐️❗️ Combiloader WINTER SALE! ❗️⭐️

✅ Till January 10th — 10%-20% discounts on ALL Combiloader modules:

➡️ If you buy for 72 USD - 721 USD, use the promo code ⭐️combiloadersale102020⭐️ to get your 10% discount.
➡️ If you buy for more than 722 USD, use the promo code ⭐️combiloadersale202020⭐️ to get your 20% discount.

⭐️ CombiLoader

[ECUtools]

⭐️❗️ Chiploader WINTER SALE! ❗️

⭐️ Till January 4th — 15% to 35% discounts on ALL modules:

➡️ 15% OFF any ChipLoader module: use the promo code ⭐️chiploader152020⭐️ to get your 15% discount;
➡️ 35% OFF any ChipLoaderNG module: use the promo code ⭐️chiploaderng352020⭐️ to get your 35% discount!

⭐️ ChipLoader
⭐️ ChipLoaderNG

[ECUtools]

⭐️❗️ S&V Edit Winter Sale! ❗️⭐️

A brand new tool for disabling systems, S&V Edit with 5-15% off!

⭐️ The modules for this tool are still being added to our website every day, so feel free to check later if the module you need is up!

When buying one module, use the promo code ➡️svedit_1⬅️ to get 5% off;
When buying two modules, use the promo code ➡️svedit_2⬅️ to get 10% off;
When buying three or more modules, use the promo code ➡️svedit_3⬅️ to get 15% off;

Starting today till January 10th, 2021

S&V Edit

[ECUtools]

⭐❗ New Module in BitBox 3.3.6 rev. 1 ❗⭐

✅ Bosch MG1/MD1 Bench
Universal module for Bench reading and writing for Bosch MG1/MD1 ECUs based on SPC and Aurix MCUs.
❗ Attention! The module works only with Scanmatik 2 Pro. It requires bench connection to the ECU with any adapter with automatic power control (BITS001, Powerbox, etc.).

✅ VAG Continental Simos12.1 is now ready for tests.

➡ Fixes and improvements:

☑️ Bosch INVCON3.3 support added to Bosch MG1/MD1 Bench.
☑️ Delphi MT05 read/clear DTC has been returned
☑️ Kia/Hyundai SIM2K-25X/26X now works with Scanmatik2Pro. It is recommended to use it.
☑️ PSA Continental SID208 now works with Scanmatik2Pro, other devices are also supported but were not properly tested.

BitBox
Bosch MG1/MD1 BENCH

[ECUtools]

⭐️ Happy New Year from ECUTools and news on our working hours during holidays! ⭐️

⭐️ ECUTools team wishes you happy New Year and great winter holidays!

Thank you so much for choosing us in this challenging year. We apprecciate your involvement with Chip-Tuning and wish you all the best today and in the upcoming 2021! This year as given us a lot, we have expanded our range or products and followed the updates of the tools we already had.

✅ For your convenience we do work during the winter holidays. The activations will be done as usual, however, there may be some delays. As for sending and delivering the tools, EMS will accept packages on January 3rd, 4th and 6th, whereas DHL will be sending parcels after January 11th.

[ECUtools]

❗️ FLEX version 5.9.0.0: OBD, Bootloader and BENCH solutions for ECU and TCU ❗️

Magicmotorsport releases new solutions for OBD programming of Bosch MED9.1.2 engine control units installed on Audi (R8 4.2 V and Lamborghini (Gallardo 5.2).
FLEX is also able to read and write the Secondary CPU (if equipped) on all GETRAG 7DCT, BOSCH 9G-Tronic and ZF 8HP mechatronics.

➡️ New protocols added:

✅ AUDI BOSCH MED9.1.2 OBD: Read/Write/Checksum Maps
✅ AUDI SIMOS 16.1 BOOT: Read/Write/Checksum Internal Flash ; Read/Write IntEeprom; Full Backup
✅ BUICK BOSCH ME9.6.1 GM BENCH: Read/Write/Checksum Internal Flash; Read/Write/Checksum External Flash; Read/Write External Eprom; Full Backup
✅ CADILLAC BOSCH ME9.6.1 GM BENCH: Read/Write/Checksum Internal Flash; Read/Write/Checksum External Flash; Read/Write External Eprom; Full Backup
✅ FIAT BOSCH MD1CS069 BENCH: Read/Write/Checksum Internal Flash; Read/Write/Internal Eeprom; Full Backup
✅ GMC BOSCH ME9.6.1 GM BENCH: Read/Write/Checksum Internal Flash; Read/Write/Checksum External Flash; Read/Write External Eprom; Full Backup
✅ HYUNDAI KEFICO CPGDSH1.26.1 BOOT: Read/Write/Checksum/Internal Flash; Read/Write IntEeprom; Full Backup
✅ KIA KEFICO CPGDSH1.26.1 BOOT: Read/Write/Internal Flash; Read/Write IntEeprom; Full Backup
✅ LAMBORGHINI BOSCH MED9.1.2 OBD: Read/Write/Checksum Maps
✅ NISSAN BOSCH EDC16C41 BENCH: Read/Write/Checksum Internal Flash; Read/Write/Checksum External Flash; Read/Write External Eprom; Full Backup
✅ NISSAN BOSCH EDC17C45 BOOT: Read/Write/Checksum Internal Flash; Read/Write/Internal Eeprom; Full Backup
✅ OPEL BOSCH ME9.6.1 GM BENCH: Read/Write/Checksum Internal Flash; Read/Write/Checksum External FLash; Read/Write External Eprom; Full Backup
✅ PORSCHE Continental SDI 7 BOOT: Read/Write Checksum Internal Flash; Read/Write External Eeprom; Full Backup
✅ PORSCHE Continental SDI 8 BOOT: Read/Write Checksum Internal Flash; Read/Write External Eeprom; Full Backup
✅ SAAB BOSCH ME9.6.1 GM BENCH: Read/Write/Checksum Internal Flash; Read/Write/Checksum External FLash; Read/Write External Eprom; Full Backup
✅ VINFAST BOSCH MG1CS088 BENCH: Read/Write Checksum Internal Flash; Read/Write Internal Eeprom; Full Backup
✅ Volkswagen (VW) BOSCH Simos 10.14A BOOT: Read/Write/Checksum Internal Flash; Read/Write IntEeprom; Full Backup
✅ Volkswagen (VW) SIMOS 16.1 BOOT: Read/Write/Checksum Internal Flash; Read/Write IntEeprom; Full Backup

➡️ Bug Fixes:
✅ Fixed issue with writing of external flash in BOSCH ME9.0 FORD & VOLVO
✅ Fixed no action error with 8GMF and TRW EMS2 protocol.
✅ VOLVO ME7.0 fixed writing issue in BENCH mode.
✅ Fixed BDM Internal Flash reading on different MCU types ( MPC55x )

➡️ Software improvements:
✅ Added support for BOSCH 9G-Tronic; ZF 8HP and GETRAG 7DCT SecondaryCPU ( The adaptation after clone in not needed anymore with any TCUs versions )
✅ Improved OBD writing on FORD BOSCH MEDG17.0
✅ Improved autodetection for Marelli Service Mode

❗️ [ IMPORTANT! ] After this version, you will need to update your FLEX to the latest Software version 5.9.0.0. SW versions prior to 5.9.0.0 will no longer allow the use of the BENCH 4090000 protocol. If you have an older version of the software, FLEX will show the following message during the “Connect” option: “Internal server error. Contact technical support. Failed to connect.”

⭐️ Flex Master
⭐️ Flex Slave

[ECUtools]

❗️ K-TAG Bootmode: read, writing and cloning of BOSCH ME17.U.6 ❗️

⭐️ Bosch ME17.U.6 equipped on the brand new Side by Side of the CF Motorcycle: Uforce 1000

➡️ Bosch ME17.U.6: RD, WR, Clone
✅ CF Moto UFORCE 1000 - Bosch ME17.U.6

⭐️ Reading and writing through OBD for KESSv2 247 protocol: ECU Keihin RBW

➡️ Keihin RBW: RD, WR
✅ Husqvarna Enduro 701 Enduro - Keihin RBW
✅ Husqvarna Supermoto 701 Supermoto - Keihin RBW
✅ Husqvarna Vitpilen 701 - Keihin RBW

⭐️ K-TAG Master
⭐️ K-TAG Slave

[ECUtools]

❗ Autotuner Update for Renault & Mercedes and a Datalogging Solution! ❗

✅ Bosch
EDC17C11
EDC17C42 *
EDC17C66
EDC17C84 *
EDC17CP10
EDC17CP19
EDC17CP46
EDC17CP57
EDC17CP58
MD1CS006
MD1CP001
ME17.9.20
MED17.7.1
MED17.7.2
MED17.7.3
MED17.7.3.1
MED17.7.5
MED17.7.7
* Renault only

✅ Siemens
EMS3110
EMS3125
EMS3150
EMS3155

✅ Delphi
CRD3.30
CRD3.7A
CRD3.6
CRD3.59
CRD3.10
CRD3.20
CRD3.40
CRD3.50
CRD3.58
CRD3.2R
CRD3.60
CRD3.E1
CRD3.F1

✅ Continental
SID307
SID309
SID310

✅ Hitachi
BED434

✅ Valeo
V50.1

⭐️ Autotuner Master
⭐️ Autotuner Slave

[ECUtools]

❗️ Combiloader Update: EMS210x Ford J2534 ❗️

The module works with CombiLoader version 2.15.
It supports software and map area reading/writing of EMS2101 (Test) / 2102 (Test) / 2103 ECUs in:
✅ Ford Fiesta and Mondeo 4 vehicles 1.25L, 1.4L, 1.6L.

⭐️ EMS210x Ford J2534
⭐️ CombiLoader

[ECUtools]

❗️ BitBox 3.3.7 rev. Update: A New Module and More! ❗️

☑️ New modules:

➡️ Ford Continental Petrol CAN has been released with following families:

✅ Ford Continental EMS2204 TC1738 2MB CAN - virtual reading/writing/checksums calculation and VBF to BIN decryption feature
✅ Ford Continental EMS2205 TC1766 1.46MB CAN - virtual reading/writing/checksums calculation and VBF to BIN decryption feature
✅ Ford Continental EMS2208 TC1767 2MB CAN - virtual reading/writing/checksums calculation and VBF to BIN decryption feature
✅ Ford Continental EMS2211 TC1738 2MB CAN - virtual reading/writing/checksums calculation and VBF to BIN decryption feature
✅ Ford Continental EMS2214/EMS2215 TC1738 2MB CAN - virtual reading/writing/checksums calculation and VBF to BIN decryption feature
✅ Ford Continental EMS24xx TC1791 4MB CAN - virtual reading/writing/checksums calculation and VBF to BIN decryption feature
✅ Ford Continental EMS2510/EMS2511 TC1791 4MB CAN - virtual reading/writing/checksums calculation and VBF to BIN decryption feature

⭐️ All families support writing with update and you can decrypt VBF file to BIN by using special button in BitBox application. For each family VBF will be decrypted and checked for compatibility with the selected family!

➡️ Fixes and improvements:

✅ Bosch MG1/MD1 Bench added some new ECU types:
- MD1CE100 (MAN, KAMAZ)
- MD1CP006 (Ford)
- MD1CS012 (Kia/Hyundai)
- and other ECU types which required other TSW.

❗️ ECUs later than 06/2020 are still not supported due to the new authentication system. For now the newest BMW, Kia/Hyundai and BRP Rotax have been found with this issue.
☑️ Master/Slave interface fixes
☑️ UI minor Fixes

Ford Continental Petrol CAN
BitBox

[ECUtools]

❗️ ECULite Update: v1.97.016 ❗️

⭐️ What's new:

✅ Denso 1.6
Defination file for SW:

89663-02G40-

✅ Denso 2.0
Defination file for SW

89663-06460-
89663-06E10-
89663-42601-
89663-42B82-

✅ Denso 2.4
Defination file for SW

89663-06431-
89663-42490-
89663-42544-
89663-42D70-

✅ Denso 3.5
Defination file for SW

89663-48A80-

✅ Toyota Denso DTC
Defination file for SW:

89663-05870-
89663-06G23-
89663-0T090-
89663-0Z191-
89663-30E01-
89663-33841-
89663-33G80-
89663-33L20-
89663-6A711-

✅ Subaru Denso DTC
Defination file for SW:

D2TB101L
A2UH000A
E2TB101J

✅ A new module Subaru Denso 2.0
Software versions:

E2UD001E
E2VF211G
E2VF241G
EP5D003R
EP5F300s
EP5F300t
EP5G601B
EP5L000p

✅ A new module Kamaz EDC7UC31 DTC
Software Versions:

702V141_740.60-360-290812_5460-4010142-01
702V141_740.60-360-290812_6460-4010122-01
702V141_740.602-360-170214_5350-4010121-01
702V141_740.602-360-170214_6460-4010122-01
702V141_740.61-320-290812_5460-4010142-01
702V141_740.61-320-290812_6460-4010122-01
702V141_740.612-320-170214_6460-4010122-01
702V141_740.62-280-290812_5460-4010142-01
702V141_740.62-280-290812_6460-4010122-01
702V141_740.622-280-170214_5350-4010121-01
702V141_740.622-280-170214_65111-4010121-01
702V141_740.622-280-260815_5350-4010121
702V141_740.622-280-280915_65111-4010121
702V141_740.63-400-290812_5460-4010142-01
702V141_740.63-400-290812_6460-4010122-01
702V141_740.632-400-170214_65111-4010121-01
702V141_740.632-400-170214_6560-4010121-021
702V141_740.642-420-170214_65111-4010121-01
702V141_740.652-260-170214_5350-4010121-01
702V141_740.662-300-170214_65111-4010121-01
702V141_740.662-300-170214_65111-4010121-02
702V141_740.662-300-290812_5350-4010121
702V141_740.73-400-070714_6460-4010122-01
702V141_740.73-400-070714_6460-4010141-01
702V141_740.73-400-070714_6460-4010141-02
702V141_740.73-400-290812_6460-4010122-01

986702V310_740.705-300-020418_5350-4010010-16_OFF_FAN_OFF_EFU 986702V310_740.705-300-020418_65115-4010010-16
986702V310_740.705-300-190618_5350-4010010-16_OFF_FAN_ON_EFU_20-06-18
986702V310_740.705-300-190618_65115-4010010-16_OFF_FAN_OFF_EFU_20-06-18
986702V310_740.705-300-190618_65115-4010010-16_OFF_FAN_ON_EFU_20-06-18
986702V310_740.705-300-190618_65115-4010010-16_ON_FAN_ON_EFU_20-06-18
986702V310_740.735-400-020418_5350-4010010-16_FAN

⭐️ ECULite