Chip Tuning Tools

[ECUtools]

❗️DashCoder 4 (DC4) Update❗️



✅ Update Pack 06/2025 in DashCoder 4! https://ecutools.eu/publications/das...date-04072025/

[ECUtools]

❗️Tuning Solution Update❗️



➡️ Tuning Solution – New Update V17.5.0.0: https://ecutools.eu/publications/tun...date-08072025/



✅ FORD SID212EVO DPF, EGR, ADBLUE, DTC

✅ DFSK ME7.8.8 LAMBDA, DTC

✅ ASTON MARTIN EEC-VI LAMBDA

✅ JAC LINCONTROL LAMBDA

✅ CHEVROLET SIMTEC76 LAMDA

& much more..



Tuning Solution: https://ecutools.eu/chip-tuning/tuning-solution/

[ECUtools]

❗️BitEdit and BitBox Update❗️



⭐️ A new BitEdit module and BitBox FID 504 addition! https://ecutools.eu/publications/bit...date-10072025/



✅ Isuzu Transtron Aurix RZ4F: https://ecutools.eu/chip-tuning/bite...on-aurix-rz4f/

A new BitEdit module for editing calibrations of Isuzu Transtron Aurix used in Isuzu vehicles with 2.2TD RZ4F engine.





✅ Isuzu Transtron Aurix: https://ecutools.eu/chip-tuning/bitb...anstron-aurix/

BitBox have added exclusive support of Isuzu and Mazda vehicles with Transton L7.1K ECUs based on Aurix TC275 in module Isuzu Transton Aurix.



It allows Real Reading, Virtual Reading, Writing with CS fix and as option Installation of protection from Real Read.

[ECUtools]

❗️ProBYTE Update❗️



➡️ New modules in ProBYTE: https://ecutools.eu/chip-tuning/probyte/!



✅ Volvo Diesel TRW EMS 2.3 (EGR DPF SCR OFF DTC OFF): https://ecutools.eu/chip-tuning/prob...el-trw-ems-23/


✅ Renault Diesel TRW EMS 2.3 (EGR DPF SCR OFF DTC OFF): https://ecutools.eu/chip-tuning/prob...sel-trw-ems32/

[ECUtools]

❗️FLEX Update❗️



✅ OBD and Bench for the 6-gear transmission units in FLEX!



➡️ New release with version 7.26.0.0 of Flex, focusing on OBD and Bench support for Denso SH72531 TCUs installed on Mazda vehicles: https://ecutools.eu/publications/flex-update-15072025/



With this new OBD protocol, you can seamlessly access the map area by connecting the OBD cable to the diagnostic socket of the vehicle, whereas with the Bench protocol you can now access the full content of Flash and EEPROM memories.

[ECUtools]

❗️New iProg Scripts❗️



New iPROG PRO Scripts from Cardiag! https://ecutools.eu/publications/new...pts-160720925/



✅ KTM Duke SPC5645S (CAN-BUS): https://ecutools.eu/additional-equip...duke-scp5645s/


✅ MG 5 EV (70F3532 Locked) Continental CAN-BU: https://ecutools.eu/additional-equip...ental-can-bus/

[ECUtools]

❗️ProBYTE Update❗️



➡️ A new module in ProBYTE: https://ecutools.eu/chip-tuning/probyte/!



✅ Suzuki Gasoline Melco MH81XX (CAT EVAP EGR DTC OFF): https://ecutools.eu/chip-tuning/prob...-melco-mh81xx/

[ECUtools]

❗️Scripts for UPA-USB Serial Programmer-S are here❗️



✅ Scripts for UPA-USB Serial Programmer-S are now available! https://ecutools.eu/publications/scr...-upa-17072025/



➡️ Various systems are supported:



✅ ABS

✅ BCM

✅ BSI

✅ Dashboard

✅ Ecu

✅ PCM

✅ duckduckduckduck

✅ SAS

✅ SRS Airbag

✅ PANEL

✅ Tools

[ECUtools]

❗️Mercedes DSM/DSM222 EEPROM Clone Tool has been added❗️



✅ Mercedes DSM/DSM222 EEPROM Clone Tool allows transferring EEPROM in gear selector control units with the FBS3/FBS4 DSM (Continental) on Mercedes-Benz cars (205/212/222/166/447/907): https://ecutools.eu/additional-equip...om-clone-tool/



➡️ Find out more: https://ecutools.eu/publications/mer...g-tool-180725/!

[ECUtools]

❗️CHECKECU - New Update V7.4.1.0❗️



➡️ NEW SOLUTIONS ADDED:



✅ duckduckduckduck Vag Bosch MG1CS011 SPC5777

✅ duckduckduckduck Opel Bosch EDC17C42

✅ ECU Audi RS6 Bosch MG1CS008

✅ DASHBOARD DR 6 MB91F594

✅ AIRBAG Bmw 1 Series F40 Continental

and more...

CHECKECU: https://ecutools.eu/additional-equipment/check-ecu/

[ECUtools]

❗️Autotuner Update❗️



➡️ Continental GPEC4LM in Autotuner! https://ecutools.eu/publications/aut...date-26072025/

[ECUtools]

❗️ECM Titanium Drivers Update❗️



✅ New ECM Titanium Drivers for Bosch MED17.9.32 ECU – SsangYong. https://ecutools.eu/publications/ecm...date-26072025/

[ECUtools]

❗️ECULite Update❗️



✅ ECULite Release 1.118.90: New software for previously released modules https://ecutools.eu/publications/ecu...date-29072025/

[ECUtools]

❗️FLEX Update❗️



✅ Program Bosch E68 engine units installed on Cadillac CT6 vehicles produced in 2019 and in 2020 in FLEX: https://ecutools.eu/chip-tuning/flex-master/.



➡️ More information here: https://ecutools.eu/publications/flex-update-29072025/

[ECUtools]

❗️❗️PCMflash Activation Delays❗️❗️



From August 1st to 11th inclusive, the PCMflash activations will come with a delay. Dongle replacement procedure is going to be suspended during this period. Please plan your work and purchases accordingly.


PCMflash: https://ecutools.eu/chip-tuning/pcmflash/

[ECUtools]

⭐️❗️Alientech Promo❗️⭐️



⭐️ Get KESS3 Master or Slave with protocols discount if you do not have a KESS3 yet!



➡️ KESS3 Master options:

✅ KESS3 MASTER bundle with CAR OBD + BENCH [ New ] 5480 EUR 2990 EUR (https://ecutools.eu/chip-tuning/alie...car-obd-bench/)

✅ KESS3 MASTER bundle with Agri-Trucks OBD + BENCH [ New ] 5480 EUR 2990 EUR (https://ecutools.eu/chip-tuning/alie...cks-obd-bench/)

✅ KESS3 MASTER bundle with CAR OBD + CAR BENCH + Truck/Agri OBD + Truck/Agri BENCH [ New ] 10 960 EUR 5980 EUR (https://ecutools.eu/chip-tuning/alie...gri-obd-bench/)



➡️ KESS3 Slave options:

✅ KESS3 SLAVE bundle with CAR OBD + BENCH [ New ] 2280 EUR 1290 EUR (https://ecutools.eu/chip-tuning/alie...car-obd-bench/)

✅ KESS3 SLAVE bundle with Agri-Trucks OBD + BENCH [ New ] 2280 EUR 1290 EUR (https://ecutools.eu/chip-tuning/alie...cks-obd-bench/)

✅ KESS3 SLAVE bundle with CAR OBD + CAR BENCH + Truck/Agri OBD + Truck/Agri BENCH [ New ] 4560 EUR 2580 EUR (https://ecutools.eu/chip-tuning/alie...gri-obd-bench/)



*Take advantage of this promotion from August 1st to September 8th, 2025. Offer is valid for software activation, KESS3 hardware is not included.

KESS3 Master and Slave: https://ecutools.eu/publications/ali...tion-01082025/

[ECUtools]

❗️FLEX Update❗️



✅ Exclusive Service for ETC3 (2017-2024) in FLEX!



With version 7.28.0.0, FLEX now supports in OBD and Bench ECUs installed on DAF Trucks produced from 2017 to 2021.


Version 7.28.0.0: https://ecutools.eu/publications/flex-update-05082025/
FLEX: https://ecutools.eu/chip-tuning/flex-master/

[ECUtools]

❗️Autotuner Update❗️



✅ VAG EDC15P+/EDC15VM+ in Autotuner: https://ecutools.eu/publications/aut...date-05082025/!

[ECUtools]

❗️BitEdit Update❗️



✅ A new module in BitEdit: Toyota Denso Diesel 7: https://ecutools.eu/chip-tuning/bite...enso-diesel-7/



Software module for editing calibrations Denso Gen4 ECU of deisel Toyota and Lexus vehicles.

BitEdit: https://ecutools.eu/chip-tuning/bitedit/