Chip Tuning Tools - Page 7
MS Tuningfiles

Page 7 of 7 FirstFirst ... 567
Results 121 to 128 of 128

Thread: Chip Tuning Tools

  1. #121
    Senior Member Stage 2 ECU
    Join Date
    Nov 2020
    Location
    Russia, Vologda, Leningradskaya street, 71
    Posts
    128

    Default

    F Tuningfiles
    ❗️ Autotuner Update for Bosch ME17.9.52! ❗️

    ➡️ Bench reading and writing for Bosch ME17.9.52 on Peugeot and Toyota in Autotuner

    Autotuner is now able to perform the following operations:

    ✅ Bench Reading
    ✅ Bench Writing

    On the following ECU:

    ✅ Bosch ME17.9.52

    Vehicles concerned:

    ✅ Peugeot 1.0i 69hp
    ✅ Toyota 1.0i 69hp
    ✅ Toyota 1.0 VVT-i 69hp

    Autotuner Master
    Autotuner Slave
    ☑️ WhatsApp: +7 (921) 539-93-54

  2. Dyno Chiptuningfiles
  3. #122
    Senior Member Stage 2 ECU
    Join Date
    Nov 2020
    Location
    Russia, Vologda, Leningradskaya street, 71
    Posts
    128

    Default

    ❗️ KESSv2 Update: Agriculture Vehicles ❗️

    ✅ KESSv2 allows you to read and write agriculture vehicles via OBD such as Case Ih, New Holland and Steyr, supporting Bosch MD1CE101 ECUs. More than 700 new vehicles available!

    ➡️ More information here

    KESSv2 Master
    KESSv2 Slave
    ☑️ WhatsApp: +7 (921) 539-93-54

  4. #123
    Senior Member Stage 2 ECU
    Join Date
    Nov 2020
    Location
    Russia, Vologda, Leningradskaya street, 71
    Posts
    128

    Default

    ❗️ M&D Flasher Pre-Order Licenses! ❗️

    ✅ License 84- GM Bosch BCM BENCH and Continental BCM BENCH and License 86 - GM ECU Sirius D3/D32/4R/42R/D42/D52 are up for pre-order!

    ➡️ More information here

    License 86
    License 84

    The activation files will be sent within a week after 22.02.2022
    ☑️ WhatsApp: +7 (921) 539-93-54

  5. #124
    Senior Member Stage 2 ECU
    Join Date
    Nov 2020
    Location
    Russia, Vologda, Leningradskaya street, 71
    Posts
    128

    Default

    ❗️ Two brand new tools: MUT-3 J2534 Driver and Mitsubishi Flasher! ❗️

    MUT-3 J2534 Full Driver works with the original software for Mitsubishi MUT3 diagnostics. The driver supports 100% functionality of the original MUT III and MUT III Lite Scanner.

    Mitsubishi Flasher is a Mitsubishi ECU programmer for chip tuning and car repairing. The USB dongle is required for working. Reading and writing control units is done via the J2534 adapter.

    ➡️ More information here
    ☑️ WhatsApp: +7 (921) 539-93-54

  6. #125
    Senior Member Stage 2 ECU
    Join Date
    Nov 2020
    Location
    Russia, Vologda, Leningradskaya street, 71
    Posts
    128

    Default

    ❗️ FLEX version 6. 4.0.0 released! ❗️

    ➡️ New Bench Solutions for Bosch SPC58 Control Units in FLEX

    Here are some of the supported vehicles:

    ✅ Suzuki 1.4T BoosterJet 48v 2021
    ✅ Peugeot 1.2 VTI Puretech 2021
    ✅ Opel Mokka 1.2 Turbo 2021
    ✅ Mahindra 2.2 CRDe 2020

    The new bench protocol is available for the following software packages:

    ➡️ FLS0.1 SW Flex ECU (car, van, bike) OBD + Bench
    ➡️ FLS0.10 SW Flex Infineon TC17xx / TCxxx
    ➡️ FLS0.5 FULL Flex

    New protocols added

    ✅ Suzuki BOSCH MG1CS026: Read / Write / Checksum Internal Flash; Read / Write Internal Eeprom; Full backup
    ✅ DS BOSCH MG1CS032: Read / Write / Internal Flash Checksum; Read / Write Internal Eeprom; Full backup
    ✅ Peugeot BOSCH MG1CS032: Read / Write / Checksum Internal Flash; Read / Write Internal Eeprom; Full backup
    ✅ Opel BOSCH MG1CS032: Read / Write / Checksum Internal Flash; Read / Write Internal Eeprom; Full backup
    ✅ Mahindra BOSCH MD1CS018: internal flash read / write / checksum; Read / Write Internal Eeprom; Full backup

    Software Improvements


    ✅ Added support for JLR BOSCH 6HP28 in Bench

    Bug fixes

    ✅ Fixed OBD writing problem for some versions of Porsche AL552
    ✅ Fixed CRC issue with BOSCH EDC16C39 in Bench

    ⭐️ FLEX Master
    ⭐️ FLEX Slave
    ☑️ WhatsApp: +7 (921) 539-93-54

  7. #126
    Senior Member Stage 2 ECU
    Join Date
    Nov 2020
    Location
    Russia, Vologda, Leningradskaya street, 71
    Posts
    128

    Default

    ⭐️❗️ PCMflash Update! ❗️ ⭐️

    New modules and additions to the current protocols in PCMflash!

    Module 82: Bosch SH725XX TCU Bootloader, designed to work in service mode (on the bench) with Bosch TCUs with SH725xx microcontrollers, available in ZF 8HP, VAG DQ380/381/500, MEG17.9.8, MEG17.9.13, MEG17.9.21, TC60/80. Supports Flash and EEPROM reading, writing, checksum corrections.

    Module 83: VAG Bosch DQ380/DQ381/DQ500/ZF 8HP, designed to work via the diagnostic connector with DSG and automatic transmission units used in VAG vehicles. Reading (virtual), writing, checksum corrections.

    Module 84: VAG Delphi DCM6.2 supports working via the diagnostic connector of VAG vehicles with Delphi DCM6.2 ECUs. Supports virtual reading, writing, checksum corrections.

    Module 85: Ford Gearbox is designed for working via the diagnostic connector with 6HP28, 5R/6R/6 F/8 F/10R TCUs of various modifications used in Ford vehicles. Reading, writing and checksum corrections is supported.

    ➡️ Updates for the existing modules can be found here ⬅️
    ☑️ WhatsApp: +7 (921) 539-93-54

  8. #127
    Senior Member Stage 2 ECU
    Join Date
    Nov 2020
    Location
    Russia, Vologda, Leningradskaya street, 71
    Posts
    128

    Default

    ❗️ New tools in our catalog: DFOX Master and Slave! ❗️

    ⭐️ DFOX from DFB TECHNOLOGY allows serial communication with the Engine and Automatic transmission control units via the OBD diagnostic socket. It is a professional software for reading and programming the control units of:

    ✅ Cars
    ✅ Trucks
    ✅ Motorbikes
    ✅ Tractors
    ✅ Boats
    ✅ Additional TCU package available for Automatic Transmissions

    ➡️ It also allows communication in the following modes:

    ✅ BDM and JTAG
    ✅ BOOT Mode
    ✅ BENCH Mode (or Service mode)
    ✅ FULL SYSTEM via pinout

    ➡️ Compatible operating systems:

    ✅ Windows 7
    ✅ Windows 8/8.1
    ✅ Windows 10
    ✅ Windows 11!

    ➡️ Minimum recommended requirements:
    CPU > 2.5 GHz (Intel i5, i7)
    RAM > 4GB

    The tool has annual subscription, though it is not mandatory for working.

    ECUTools are the first and only dealer of DFB TECHNOLOGY in Russia!

    ➡️ DFOX Master
    ➡️ DFOX Slave
    ☑️ WhatsApp: +7 (921) 539-93-54

  9. #128
    Senior Member Stage 2 ECU
    Join Date
    Nov 2020
    Location
    Russia, Vologda, Leningradskaya street, 71
    Posts
    128

    Default

    ❗️ M&D flasher license for GM ACDelco E37/E38 is open for pre-order! ❗️

    ✅ PRE-ORDER License 90 GM ACDelco E37/E38 ECU BENCH/OBDII is up!

    The module works with ACDelco E37/E38 in OBDII Mode or Bench Mode.

    ➡️ 1. OBDII Mode (working in the vehicle):

    ✅ Identification
    ✅ Error reading
    ✅ Error reset
    ✅ Flash reading
    ✅ Calibration area writing (without checksum corrections)

    ➡️ 2. Bench Mode:

    ✅ Flash reading
    ✅ Flash writing (without checksum corrections)
    ✅ EEPROM reading
    ✅ EEPROM writing

    Not all software versions may be supported.

    ⭐️ The activation files will be sent within a week after 03.05.2022
    ☑️ WhatsApp: +7 (921) 539-93-54

  10. SELF Tune

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •