Chip Tuning Tools - Page 3
MS Tuningfiles

Page 3 of 3 FirstFirst 123
Results 41 to 48 of 48

Thread: Chip Tuning Tools

  1. #41
    Member Stage 1 ECU
    Join Date
    Nov 2020
    Location
    Russia, Vologda, Leningradskaya street, 71
    Posts
    48

    Default

    F  Dynochiptuning files
    ⭐️ ❗️ New cables for FLEX and Autotuner are now available! ❗️ ⭐️

    FLX2.14 FLEXBox OBD female cable for FLEX Master and Slave as well as ✅ Universal cable for EDC16+ME(D)9 for Autotuner Master and Slave

    ⭐️ FLX2.14 FLEXBox OBD female cable
    ⭐️ Universal cable for EDC16+ME(D)9
    ☑️ WhatsApp: +7 (921) 539-93-54

  2. Dyno Chiptuningfiles
  3. #42
    Member Stage 1 ECU
    Join Date
    Nov 2020
    Location
    Russia, Vologda, Leningradskaya street, 71
    Posts
    48

    Default

    ❗️ K-TAG Service Mode: new protocol to work on the ECUS Bosch MG1CP007 ❗️

    ✅ Remap the new Porsche 992 without opening the ECU with K-TAG

    ✅ Reading
    ✅ Writing

    ➡️ Bosch MG1CP007
    Porsche 911 Carrera 992 3.0 V6 24v Turbo 8AT - Bosch MG1CP007 TC299TP

    ✅ A protocol for SAAB equipped with ECU Bosch EDC17CP21 was also introduced

    ➡️ Bosch EDC17CP21
    Saab 95 2.0 16v TTiD - Bosch EDC17C19 TC1792
    Saab 95 2.0 TiD 6AT - Bosch EDC17CP21 TC1792
    Saab 95 2.0 TiD 6MT - Bosch EDC17CP21 TC1792
    Saab 95 2.0 TTiD 6AT - Bosch EDC17CP21 TC1792
    Saab 95 2.0 TTiD 6MT - Bosch EDC17CP21 TC1792

    ⭐️ K-TAG Master
    ⭐️ K-TAG Slave
    ☑️ WhatsApp: +7 (921) 539-93-54

  4. #43
    Member Stage 1 ECU
    Join Date
    Nov 2020
    Location
    Russia, Vologda, Leningradskaya street, 71
    Posts
    48

    Default

    ⭐️❗️ MDflasher PRE-ORDER - Licence 66 - Renault/VAZ ABS/ESP BOSCH OBDII ❗️⭐️

    ➡️ This module allows working via OBDII connector via CAN-bus with the control units ABS/ESP BOSCH 9.0–9.1 with MC TMS470, TMS570 and EEPROM 95128/95320/95640, equipped on the following vehicles: Renault, Dacia, Nissan, VAZ, 2014+

    ➡️ Module supports:

    ✅ ECU Identification
    ✅ Error Reading/Clearing
    ✅ EEPROM Reading / Writing
    ✅ Reading FullFlash / Writing calibration and software area
    ✅ VIN data changing
    ✅ ECU reset
    ✅ Backups are saved automatically to the «Backup» folder. Even if you have accidentally deleted the file after reading, you can find it in the folder with the date and time of creation in the title.

    ➡️ EEPROM reading / writing takes from 7 to 15 seconds, depending on the processor and the adapter used. This module does not calculate checksums.

    Approximate vehicle list:
    Dacia Duster
    Dacia Logan
    Dacia Sandero
    Lada Vesta
    Lada X-Ray
    Nissan Terrano
    Renault Duster
    Renault Logan
    Renault Sandero
    Renault ClioIV
    Renault Captur
    Renault Kaptur

    Checked ECUs:
    TMS470+95320 — 2014
    TMS470+95320 — 2015
    TMS570+95128 — 2016
    TMS570+95128 — 2017
    TMS570+95128 — 2018
    TMS570+95128 — 2019
    TMS570+95128 — 2020
    TMS570+95320 — 2017
    TMS570+95640 — 2016

    ❗️ Attention! The operation of this module is completely safe, in case of loss of communication during recording, for example, if the battery on a laptop or the battery on a car runs out, it is enough to repeat the recording procedure and the operation will be restored.

    ❗️ The activation files will be sent within a week after 03.03.2021 ❗️

    MD flasher
    License 66
    ☑️ WhatsApp: +7 (921) 539-93-54

  5. #44
    Member Stage 1 ECU
    Join Date
    Nov 2020
    Location
    Russia, Vologda, Leningradskaya street, 71
    Posts
    48

    Default

    ❗️ K-TAG Service Mode: reading, writing and cloning Bosch MED9.6 and ME9.6.1: Opel Insignia 2.0l and 2.8l Turbo Euro 5 ❗️

    ✅ Reading
    ✅ Writing
    ✅ Cloning

    ➡️ Bosch ME9.6 and ME9.6.1

    ☑️ Fisker Karma 2.0 16v VVT DI Turbo Ecotec - Bosch MED9.6.1
    ☑️ Opel Antara A 3.2 Ecotec - Bosch ME9.6.1
    ☑️ Opel Insignia 35 2.0 Turbo ecoFLEX - Bosch MED9.6.1
    ☑️ Opel Insignia 35 2.8 V6 BiTurbo OPC - Bosch ME9.6.1
    ☑️ Opel Insignia 35 2.8 V6 Turbo - Bosch ME9.6.1
    ☑️ Opel Insignia 68 2.0 Turbo ecoFLEX - Bosch MED9.6.1
    ☑️ Opel Insignia 68 2.8 V6 BiTurbo OPC - Bosch ME9.6.1
    ☑️ Opel Insignia 68 2.8 V6 Turbo - Bosch ME9.6.1
    ☑️ Opel Insignia 69 2.0 Turbo ecoFLEX - Bosch MED9.6.1
    ☑️ Opel Insignia 69 2.8 V6 BiTurbo OPC - Bosch ME9.6.1
    ☑️ Opel Insignia 69 2.8 V6 Turbo - Bosch ME9.6.1
    ☑️ Opel Signum 2.8 V6 Turbo - Bosch ME9.6
    ☑️ Opel Vectra C 2.8 V6 Turbo - Bosch ME9.6
    ☑️ Saab 93 2.8 V6 24v Turbo Aero - Bosch ME9.6.1
    ☑️ Saab 93 2.8 V6 24v Turbo FWD - Bosch ME9.6.1
    ☑️ Saab 93 2.8 V6 24v Turbo X - Bosch ME9.6.1
    ☑️ Saab 93 2.8 V6 24v Turbo XWD - Bosch ME9.6.1
    ☑️ Saab 95 2.8 V6 24v Turbo Aero - Bosch ME9.6.1
    ☑️ Suzuki Grand Vitara JT 3.2 V6 5AT - Bosch ME9.6.1
    ☑️ Suzuki Xl7 3.6 V6 24v - Bosch ME9.6.1

    ⭐️ K-Tag Master
    ⭐️ K-Tag Slave
    ☑️ WhatsApp: +7 (921) 539-93-54

  6. #45
    Member Stage 1 ECU
    Join Date
    Nov 2020
    Location
    Russia, Vologda, Leningradskaya street, 71
    Posts
    48

    Default

    ❗️ BitBox Update: A New Module and Additions! ❗️

    ➡️ New modules:
    ⭐️ Isuzu Transtron SH7058/SH7059/SH72533/SH72544 supports reading/writing and checksums calculation.

    ➡️ New families:
    ✅ Ford Continental EMS2701 TC1782 added to module Ford Continental Petrol CAN with virtual reading/writing and checksums calculation.

    ➡️ Improvements and fixes:
    ✅ Bosch MG1CA094 with SPC572 added to module Bosch MD1/MG1 Bench with reading/writing/recovery/checksums calculation and EEPROM reading.
    ✅ Some stability fixes for SIM2K-260 on SM2 devices.
    ✅ Added support for Mazda Mitsubishi Gen4 M41 ECUs.

    ⭐️ BitBox
    ⭐️ Isuzu Transtron
    ☑️ WhatsApp: +7 (921) 539-93-54

  7. #46
    Member Stage 1 ECU
    Join Date
    Nov 2020
    Location
    Russia, Vologda, Leningradskaya street, 71
    Posts
    48

    Default

    ❗️ KESS v2 Update! ❗️

    ☑️ Reading and Writing in OBD the ECU Delphi DCM3.2
    ☑️ Added the Mercedes-Benz vehicles to the KESSv2 list are vehicles in production from 2006 to 2011.

    ➡️ Delphi DCM3.2 (CRD.11)
    ✅ Mercedes-Benz C-Class W204 200 CDI 5AT Delphi DCM3.2 - CRD.11
    ✅ Mercedes-Benz C-Class W204 200 CDI 6MT Delphi DCM3.2 - CRD.11
    ✅ Mercedes-Benz C-Class W204 220 CDI 5AT Delphi DCM3.2 - CRD.11
    ✅ Mercedes-Benz C-Class W204 220 CDI 6MT Delphi DCM3.2 - CRD.11
    ✅ Mercedes-Benz C-Class T-Model S204 200 CDI 5AT Delphi DCM3.2 - CRD.11
    ✅ Mercedes-Benz C-Class T-Model S204 200 CDI 6MT Delphi DCM3.2 - CRD.11
    ✅ Mercedes-Benz C-Class T-Model S204 220 CDI 5AT Delphi DCM3.2 - CRD.11
    ✅ Mercedes-Benz C-Class T-Model S204 220 CDI 6MT Delphi DCM3.2 - CRD.11
    ✅ Mercedes-Benz E-Class W211 220 CDI Delphi DCM3.2 - CRD.11

    The 755 OBD protocol is added to the K-TAG BMD communication.

    ⭐️ KESSv2 Master
    ⭐️ KESSv2 Slave
    ☑️ WhatsApp: +7 (921) 539-93-54

  8. #47
    Member Stage 1 ECU
    Join Date
    Nov 2020
    Location
    Russia, Vologda, Leningradskaya street, 71
    Posts
    48

    Default

    ⭐️ ❗️ bFlash Update! ❗️ ⭐️

    ➡️ UI / UX Update

    - Improved navigation (keyboard shortcuts, switch between flash, diag, log on the same protocol,...)
    - .MDF files are now associated with bFlash, you can double click for direct openning
    - Automatic selection of the protocol for logger & diagnostic
    - New logger interface : improved display, user configurable warnings, variables grouped by functions, variable name filter
    - Logger native support for CCP/XCP on CAN/Mode 23 UDS and KWP
    (expert feature: email support for detail)

    ➡️ bDiag Update

    - Update of the generic OBDII/SAE definitions to 2020 descriptions
    - Added Ford UDS diagnostics for MED17, EDC17, MG1 and MD1
    - Added VAG UDS diagnostics for MED17, EDC17, MG1 and MD1
    - Added Porsche 9x1 SDI9 diagnostics
    - Added Porsche 9x1 SDI21 diagnostics
    - Added Porsche 992 MG1CP007 diagnostics

    ➡️ bLog Update

    Here are the most important improvements:

    - Update of all old loggers (yes, all of them !)
    - Added specific logger for Porsche SDI21.1/2/3
    - Added specific logger for Porsche MG1CP007
    - Added specific logger for VAG PCR2.1
    - Added specific logger for VAG EDC17C46/C54/C64/C74/CP44/CP54
    - Added specific logger for VAG MD1CS004/MD1CP004/MD1CP014

    ➡️ DYNOMODE

    This brand new unique feature is available for:

    - McLaren P11 / P13 / P14
    - Porsche 9x1.1 / 9x1.2 / 992
    - Audi/Seat/Skoda/VW UDS

    ⭐️ Including a step-by-step tutorial ⭐️
    ❗️ Please note: Dynomode is an advanced feature designed for use by trained technicians on adequate testing equipment

    ➡️ bFlash new protocols

    ☑️ Improvements:

    ✅ Ford protocol automatic recognition of control unit at reading/writing time.
    ✅ Ford protocol allows application software reflash for MG1CS015/016/017/019, MEDG17.0, EMS24xx, EMS25xx, EDC17CP42 and EDC17CP65. Other models to follow!
    ✅ Ford protocol now automatically detects area to reflash.
    (unchanged areas are skipped)
    ✅ Ford protocol now supports compressed flash (faster flash) for MG1CS015/016/017/019 and EDC17CP65.

    ☑️ NEW BENCH PROTOCOLS

    ✅ Can-Am
    BOSCH MG1CA920 MPC5898

    ✅ FORD
    BOSCH EDC17CP65 TC1793
    BOSCH EDC17CP05 TC1797

    ✅ JLR
    BOSCH VC1CP103 TC277 (I-Pace)
    BOSCH MG1CS028 TC298

    ✅ PSA
    BOSCH MG1CS032 MPC5898N

    ✅ MAHINDRA
    EDC17C55 TC1767

    ✅ VW
    BOSCH INVCON2.3 TC1797 (E-Golf MK7)
    BOSCH INVCON3.3 TC275 (E-Golf MK7.5)

    ☑️ NEW OBD PROTOCOLS

    ✅ FORD
    SIEMENS EMS24xx TC1791
    BOSCH EDC17CP42 TC1791
    BOSCH EDC17CP65 TC1793
    BOSCH MG1CS019 TC298

    ⭐️ bFlash Master
    ⭐️ bFlash Slave
    ☑️ WhatsApp: +7 (921) 539-93-54

  9. #48
    Member Stage 1 ECU
    Join Date
    Nov 2020
    Location
    Russia, Vologda, Leningradskaya street, 71
    Posts
    48

    Default

    ❗️ Remap in Bootmode the brand-new ATV just released in K-TAG ❗️

    ✅ Reading, Writing and Cloning in Bootmode

    The brand-new ZForce 1000 Sport owns a 1000 4-stroke twin-cylinder engine, controlled by the ECU Bosch ME17.U.6 micro TC128.

    Bosch ME17.U.6
    CF Moto ZFORCE 1000 - ME17.U.6 TC1728

    Bosch ME17.8.8
    Saic MG3 - ME17.8.8 TC1728

    ⭐️ K-TAG Master
    ⭐️ K-TAG Slave
    ☑️ WhatsApp: +7 (921) 539-93-54

  10. Shiftec

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •