Chip Tuning Tools

[ECUtools]

❗️STool Update❗️

A new STool license and updates to the current ones: https://ecutools.eu/publications/stool-update-31122024/

License FD108: https://ecutools.eu/odometrs/s-tool/license-fd108/
➡️ License FD108 Hyundai, KIA China DNKR on R7F70141.21 with reflashing*
* Attention, only panels with certain Flash versions are supported.


✅ Hyundai Kona 2021+ Full LCD (R7F701401) Read/Write Mileage, Write Flash
✅ Hyundai Santa Cruz 2021+ Full LCD (R7F701421) Read/Write Mileage, Write Flash
✅ Hyundai Staria 2021+ Full LCD (R7F701421) Read/Write Mileage, Write Flash
✅ Hyundai Tucson 2021+ (R7F701421) Read/Write Mileage, Write Flash
✅ Hyundai Tucson 2021+ Full LCD (R7F701421) Read/Write Mileage, Write Flash
✅ Kia Carnival 2021+ (R7F701421) Read/Write Mileage, Write Flash
✅ Kia Carnival 2021+ Full LCD (R7F701421) Read/Write Mileage, Write Flash
✅ Kia Ceed 2021+ (R7F701401) Read/Write Mileage, Write Flash
✅ Kia Cerato 2021+ (R7F701401) Read/Write Mileage, Write Flash
✅ Kia K8 2021+ Full LCD (R7F701421) Read/Write Mileage, Write Flash
✅ Kia Sportage 2021+ Full LCD (R7F701421) Read/Write Mileage, Write Flash

[ECUtools]

❗️VF2 Flasher Update❗️

VF2 Flasher v2.9.1.7 Update: https://ecutools.eu/publications/vf2-flasher-update-02012025/

[ECUtools]

Combiloader and ChipTuning PRO Sale Extended

❗️ Up to 25% discount on Combiloader and ChipTuningPRO modules now till January 12th!

⭐️ The promo codes remain the same: https://ecutools.eu/publications/combiloader-and-chiptuningpro-winter-sale23122024/

Combiloader: https://ecutools.eu/chip-tuning/combiloader/
ChipTuningPRO: https://ecutools.eu/chip-tuning/chiptuningpro/

[ECUtools]

❗️ M&D Flasher New License ❗️



✅ A pre-order for License 103 — Great Wall Haval XC2336 SRS BENCH/OBDII PRE-ORDER is now available: https://ecutools.eu/odometrs/mdflasher/license-103-great-wall-haval-xc-2336-srs-bench-obdii/



The license works via OBDII or on bench with SRS Great Wall ECUs based on XC2336 MCUs installed on Great Wall Haval vehicles, which allows for full repair and restoration of the ECU data.



✅ Identification

✅ Reading errors

✅ Erasing errors

✅ Crash data clearing



➡️ To work, you need a stable Internet connection. Not all software versions may be supported.



❗️The license will be available after 17.02.2025❗️

[ECUtools]

❗️ M&D Flasher New License ❗️



✅ A pre-order for License 106 — Toyota/Lexus DENSO S6J3001 DASH BENCH/OBDII PRE-ORDER is now available: https://ecutools.eu/odometrs/mdflasher/license-106-toyota-lexus-denso-s6j3001-dash-bench-obdii/


The license works with DENSO dashboards based on the Spansion S6J300 MCUs installed on Toyota, Lexus vehicles from 2018.

Allow working with closed and opened MCUs.



✅ Identification

✅ DTC Reading/Clearing

✅ Mileage Reading/Writing

✅ WORK FLASH Reading/Writing

✅ TCFLASH Reading





➡️ To work, you need a stable Internet connection. Not all software versions may be supported.



❗️The license will be available after 17.02.2025❗️

[ECUtools]

❗️ECM Titanium Driver Update❗️



✅ New ECM Titanium Driver Update for Bosch EDC17C57 ECUs: enhance your workshop’s performance: https://ecutools.eu/publications/ecm-titanium-driver-update-250125/



➡️ Read more: https://ecutools.eu/publications/ecm-titanium-driver-update-250125/

[ECUtools]

❗️Autotuner Update❗️



✅ Denso Gen2 ECUs now operate in BENCH mode, with support for Lexus, Suzuki and Toyota in Autotuner: https://ecutools.eu/chip-tuning/autotuner-tool-master/!



Compatibility List

➡️ LEXUS: 350 (3.5i V6) / 4.0i V6 / 450h (3.5i V6) / 500 / 570 V8



➡️ SUZUKI: 1.8 VVT-i



➡️ TOYOTA: 1.2 CVT / 1.2T / 1.33 VVT-i / 1.5 / 1.5 CVT-i / 1.6 VVT-i / 1.8 CVT-i / 1.8 VVT-i / 2.0 CVT-i / 2.0 VVT-i / 2.0i Hybrid / 2.4 D4-D / 2.5 / 2.7 VVT-i / 2.8 D-4D / 3.5i V6 / 3.5i V6 Hybrid / 350 (3.5i V6) / 4.0i V6 / 5.7i VVTI D-4S



⭐️ Click for more information: https://ecutools.eu/publications/autotuner-update-250125/!

[ECUtools]

❗️ChipTuningPRO Update❗️



➡️ A new patch in ChipTuningPRO for Bosch MG1CS201: https://ecutools.eu/chip-tuning/chiptuningpro/bmw-mg1cs201/!



✅Bosch MG1CS201 patch (DME83Tx, DME84Tx, DME86Tx, DME88Tx) for BMW and MINI vehicles with B38xx, B46хх, B48xx, B58xx, N63xx and S63xx petrol engines.



➡️Supported vehicles:



BMW Series 2 F22, F23, F44, F45, F46 and G42

BMW Series 3 G20 and G21

BMW Series 4 G22 and G26

BMW Series 5 G30, G31, G32, F90, and F91

BMW Series 7 G11

BMW Series 8 G14, G15 and G16

BMW Series X1 F48 and F49

BMW Series X3 G01

BMW Series X5 F95 and G05

BMW Series X6 G06

BMW Series X7 07

BMW Series Z4 G29 MINI F54, F55, F56 and F57



➡️ The patch is intended for recovering standard remote engine start after tuning or unlocking ECUs made after mid 2020. It can also activate the remote start on the vehicles where this option was not included in the factory configuration.



❗️Please note that the patch does not activate the remote start on the vehicles where this option was not included in the factory configuration, but is necessary for adding into the configuration.



❗️The patch supports only FULL FLASH.

ChipTuningPRO: https://ecutools.eu/chip-tuning/chiptuningpro/

[ECUtools]

❗️ProBYTE Full in Two Versions❗️



⭐️ ProBYTE Full has two versions now: ProBYTE EDIT Full + STAGE+ and just ProBYTE EDIT Full at a lower price



➡️ More information here: https://ecutools.eu/publications/probyte-full-update-28012025/

ProBYTE EDIT Full + STAGE+: https://ecutools.eu/chip-tuning/probyte/probyte-full-stage-plus/
ProBYTE EDIT Full: https://ecutools.eu/chip-tuning/probyte/probyte-edit-full/

[ECUtools]

❗️New Update V4.1.2.0 in T-Race PRO❗️



➡️ NEW DRIVER & STAGE1/PLUS: https://ecutools.eu/publications/t-race-pro-update-01022025/



✅ Chevrolet / Opel Bosch EDC16 C39

✅ Hyundai / Kia Bosch EDC17 C53

✅ Suzuki Bosch EDC16 C34

✅ VAG Bosch EDC15P / EDC15VM

✅ Volvo Bosch EDC16 C31

✅ Volvo Siemens SID 807

and more...

[ECUtools]

⭐️❗️FLEX Update❗️⭐️



✅ New Solution for Bosch MD1CS014 in FLEX: https://ecutools.eu/chip-tuning/flex-master/!



Unlock and program Bosch MD1CS014 engine units - protected by the latest anti tuning systems - with the exclusive OBD solution by Flex.



Connect directly to the diagnostic port and work on vehicles with 3.0L TDI engines such as Audi SQ5, Audi Q8, VW Touareg, produced from 2020 on.



➡️ Click for more information: https://ecutools.eu/publications/flex-update-06022025/

[ECUtools]

❗️Autotuner Update❗️



✅ Continental & Siemens VGS2/3/4-NAG2 (7G-Tronic) in Autotuner: https://ecutools.eu/chip-tuning/autotuner-tool-master/!



➡️ More info here: https://ecutools.eu/publications/autotuner-update-0602025/!

[ECUtools]

❗️ECULite Update❗️



✅ ECULite 1.114.84: New ECULite software versions available: https://ecutools.eu/publications/eculite-update-07022025/


ECULite: https://ecutools.eu/chip-tuning/eculite/

[ECUtools]

⭐️❗️PCMflash Update❗️⭐️



✅ New module 97 and other additions in PCMflash 1.4.0



Module 97 "China AECS/LinControl", designed to work with ECU AECS-FC34/50/51 and LinControl LEC4AF/4AP, installed in cars made in China with petrol engines. Reading, writing, checksum corrections (if applicable) is supported.



➡️ DAM15KR/EA15MR/SWC14M (LinControl LEC4AF) [RD/WR/NC]

➡️ DAM16KL (LinControl LEC4AP) [RD/WR/NC]

➡️ JAC 2.0T HFC4GA3 (LinControl LEC4AF) [RD/WR/NC]

➡️ Changan 1.5L DAM15KL (AECS FC-34) [RD/WR/CK]

➡️ Dongfeng 1.5L L4A15Q6 (AECS FC-34) [RD/WR/CK]

➡️ Dongfeng/Fengxing 1.5T 4J15T (AECS FC-34) [RD/WR/CK]

➡️ Dongfeng/Fengxing 1.6L 4A92FR (AECS FC-34) [RD/WR/CK]

➡️ JAC 1.8L, 2.0L, 2.0T LJ4A18Q6/LJ481Q/HFC4NA3 (AECS FC-34/FC-51) [RD/WR/CK]

➡️ SGMW 1.8L, 2.0L LJ479Q6/LJM20B (AECS FC-34/FC-50) [RD/WR/CK]



⭐️ More about the update: https://ecutools.eu/publications/pcmflash-update-12022025/!

[ECUtools]

❗️Alientech Update❗️



✅ New KESS3 Upgrade-Pack!



Work via OBD on Delphi DCM2.7AP ECUs installed on JCB machines powered by the 4.4-liter Diesel-Max engine, ensuring fast and secure access to vehicle data directly through the diagnostic port, without the need to remove the ECU, drastically reducing machine downtime.



➡️ More information here: https://ecutools.eu/publications/alientech-update-14022025/!

[ECUtools]

❗️Editor DTС–Edit Update❗️



✅ DTС–Edit has added a lot of new software support in every module and released a new module for Nissan Almera classic B10 with a 25% discount: https://ecutools.eu/chip-tuning/dtc-edit/module-10/



⭐️ More information here: https://ecutools.eu/publications/editor-dtc-edit-update-15022025/


DTС–Edit: https://ecutools.eu/chip-tuning/dtc-edit/

[ECUtools]

❗️Probyte — Gprog Pro Update❗️



A new Probyte — Gprog Pro module:



✅ 0225 JETOUR SRS RH850 CANBUS CRASH RESET (Continental): https://ecutools.eu/additional-equipment/probyte-gprog-pro/0225-jetour-srs-rh850-canbus-crash-reset-continental/




Probyte — Gprog Pro: https://ecutools.eu/additional-equipment/probyte-gprog-pro/

[ECUtools]

❗️PCMflash Activation Delays❗️



➡️ From February 19th to 27th inclusive, the PCMflash activations will come with a delay. Please plan your purchases accordingly.


PCMflash: https://ecutools.eu/chip-tuning/pcmflash/

[ECUtools]

❗️FORScan Licenses are Available❗️



✅ FORScan Extended Licence for 1 Year and FORScan Lite for Android are here!



➡️ FORScan is a software scanner for Ford, Mazda, Lincoln and Mercury vehicles.

FORScan Extended Licence for 1 Year: https://ecutools.eu/diagnosis/forscan-extended-license/
FORScan Lite for Android: https://ecutools.eu/diagnosis/forscan-lite-for-android/

[ECUtools]

❗️Probyte — Gprog Pro Update❗️



✅ A test module 0206 TOYOTA - LEXUS DENSO RH850 (R7F701644-684) CRASH RESET CAN-FD is available for order: https://ecutools.eu/additional-equipment/probyte-gprog-pro/0206-toyota-lexus-denso-rh850-r7f701644-684-crash-reset-can-fd/

[ECUtools]

❗️Alientech Promo❗️



✅ Get KESS3 Master or Slave with 50% off FULL software or 25% off CAR software if you don't have KESS3 yet!



⭐️ Don't have KESS3 in your workshop yet?

Now is the perfect time to purchase your new reprogramming tool (Master or Slave) and take advantage of this exclusive offer: https://ecutools.eu/publications/alientech-promo-21022025/.



Take advantage of this promotion from February 21 to March 10, 2025. Offer valid for package activation, KESS3 hardware not included.

KESS3 Master: https://ecutools.eu/chip-tuning/alientech-kess-3-master/#Special%20Offers
KESS3 Slave: https://ecutools.eu/chip-tuning/alientech-kess-3-slave/#Special%20Offers

[ECUtools]

❗️ECM Titanium Driver Update❗️



✅ New ECM Titanium Driver Update for Bosch MD1CP001 ECUs: enhance your workshop’s performance: https://ecutools.eu/publications/ecm-titanium-driver-update-2202025/

[ECUtools]

❗️FLEX Update❗️



⭐️ Version 7.14.0.0 of Flex Out Now with an Exclusive for VAG 2.0 TFSI (MG1CS031)

Version 7.14.0.0: https://ecutools.eu/publications/flex-update-22022025/
Flex: https://ecutools.eu/chip-tuning/flex-master/

[ECUtools]

❗️Swiftec Update❗️



✅ Swiftec Software 3.2.1.0 is out as well as +677 new and updated solutions!

Swiftec: https://ecutools.eu/brands/swiftec/
Software 3.2.1.0: https://ecutools.eu/publications/swiftec-update-22022025/

[ECUtools]

❗️Hexprog II: version 1.0.115❗️



✅ Hexprog II Tuner software has been updated to version 1.0.115, now accessible to Hexprog II users.


Hexprog II: https://ecutools.eu/brands/microtronik/
Version 1.0.115: https://ecutools.eu/publications/hexprog-ii-update-25022025/

[ECUtools]

❗️Tuning Solution Update❗️

Tuning Solution SW - New Update V17.4.1.0: https://ecutools.eu/publications/tuning-solution-update-28022025/

[ECUtools]

❗️ECULite Update❗️



➡️ ECULite 1.115.86: New modules and software update: https://ecutools.eu/publications/eculite-update-28020225/!



✅ Module 41: https://ecutools.eu/chip-tuning/eculite/41-china-construction-agriculture-wise15/
China Construction/Agriculture Wise15, for working with special machinery and tractors made in China. There are currently more than 50 calibrations available.



Supported Software:

P160-G122

P160-G130

P160-G131

P160-G134

P160-G138

P160-G150

P160-G171

P160-G180



✅ Module 42: https://ecutools.eu/chip-tuning/eculite/42-china-construction-agriculture-wise13/
China Construction/Agriculture Wise13, for working with special machinery and tractors made in China. There are currently more than 50 calibrations available.



Supported Software:

P234-G121

P293-G104

P293-G111

P293-G112



⭐️ And new software: https://ecutools.eu/publications/eculite-update-28020225/!

[ECUtools]

❗️FLEX Update❗️



✅ Version 7.15.0.0 of Flex Out Now with Bench Solution for ZF 9HP48: https://ecutools.eu/publications/flex-update-050325/


Flex: https://ecutools.eu/chip-tuning/flex-master/

[ECUtools]

❗️ProBYTE Update❗️


➡️ New modules in ProBYTE!


✅ Deutz Diesel Bosch EDC17CV52 (EGR DPF SCR DTC OFF): https://ecutools.eu/chip-tuning/probyte/deutz-diesel-bosch-edc17cv52/
✅ VAG Group Diesel Bosch MG1CS011 (EGR CAT EVAP FLAPS): https://ecutools.eu/chip-tuning/probyte/vag-group-diesel-bosch-mg1cs011/

[ECUtools]

Probyte — Gprog Pro Update



Probyte — Gprog Pro now allows to read and write data by 4 bytes (1 word). Just put the tick at DF 4 bytes mode.

Available in the next update, after adding supported processors.

[ECUtools]

❗️ProBYTE Update❗️



➡️ A new module in ProBYTE: https://ecutools.eu/chip-tuning/probyte/!



✅ Isuzu Diesel Bosch MD1CE108 (EGR DPF SCR DTC OFF): https://ecutools.eu/chip-tuning/probyte/isuzu-diesel-bosch-md1ce108/

[ECUtools]

❗️Autotuner Update❗️



✅ Bosch MG1CS024 in Autotuner: https://ecutools.eu/chip-tuning/autotuner-tool-master/!



Bosch MG1CS024 ECUs are now supported in OBD mode for Alpina, BMW, Mini, and Toyota. This protocol allows for a Virtual Read (VR), but be aware: an unlock in BENCH mode is required before writing via OBD.

[ECUtools]

❗️Alientech Update❗️



✅ Yamaha, Suzuki, Aprilia: even more value for your KESS3 with the latest-generation motorcycles and ATVs: https://ecutools.eu/chip-tuning/alientech-kess-3-master/



➡️ More information here: https://ecutools.eu/publications/alientech-update-13032025/!

[ECUtools]

❗️Probyte — Gprog Pro Update❗️



➡️ A new Probyte — Gprog Pro module!



✅ 0226 HAVAL H9 SRS RH850 CANBUS CRASH RESET(Continental): https://ecutools.eu/additional-equipment/probyte-gprog-pro/0226-haval-h9-srs-rh850-canbus-crash-resetcontinental/

Probyte — Gprog Pro: https://ecutools.eu/additional-equipment/probyte-gprog-pro/

[ECUtools]

❗️Probyte — Gprog Pro Update❗️



➡️ A new Probyte — Gprog Pro module!



✅ 0227 TANK TRICORE AURIX RESET CRASH (GWM Veoneer) CAN BUS: https://ecutools.eu/additional-equipment/probyte-gprog-pro/0227-tank-tricore-aurix-reset-crash/

Probyte — Gprog Pro: https://ecutools.eu/additional-equipment/probyte-gprog-pro/

[ECUtools]

❗️STool Update❗️



✅ STool Version 1.77 presents new software additions and a new License FD112 for Toyotas!
https://ecutools.eu/publications/stool-update-180325/



License FD112: https://ecutools.eu/odometrs/s-tool/license-fd112/



Toyota, Lexus S6j3001 Denso clusters via OBD2 or CAN*



☑️ Lexus ES350 2018+ (s6j3001) Read/Write mileage, Read/Write eeprom, Read Flash

☑️ Lexus LX600 2020+ (s6j3001) Read/Write mileage, Read/Write eeprom, Read Flash

☑️ Lexus UX200 2018+ (s6j3001) Read/Write mileage, Read/Write eeprom, Read Flash

☑️ Toyota Camry v70 (s6j3001) Read/Write mileage, Read/Write eeprom, Read Flash

☑️ Toyota Corolla 2018+ (s6j3001) Read/Write mileage, read/write eeprom, read flash

☑️ Toyota Crown RS 2018+ (s6j3001) Read/write mileage, read/write eeprom, read flash

☑️ Toyota Highlander 2020+ (s6j3001) Read/write mileage, read/write eeprom, read flash

☑️ Toyota RAV4 2018+ (s6j3001) Read/write mileage, read/write eeprom, read flash

☑️ Toyota Yaris 2018+ (s6j3001) Read/write mileage, read/write eeprom, read flash



*If you can't do it via OBD2, then the panel must be removed and connected on the bench, Lexus LX600, Toyota Yaris are done only on the bench.



⭐️ More addition here: https://ecutools.eu/publications/stool-update-180325/!

[ECUtools]

❗️ECULite Update❗️



✅ ECULite Release 1.116.87 presents a new module 43 China Truck MD1CC878 and software additions!

Release 1.116.87: https://ecutools.eu/publications/eculite-update-260325/

Module 43 China Truck MD1CC878: https://ecutools.eu/chip-tuning/eculite/43-china-truck-md1cc878/

[ECUtools]

❗️Alientech Update❗️

✅ New OBD Protocol for Bosch MD1CS004 – 2.0L TDI VAG Engines in KESS3: https://ecutools.eu/publications/aliente...te-290325/ (https://ecutools.eu/publications/alientech-update-290325/)

[ECUtools]

❗️ProBYTE Update❗️

➡️ Two new modules in ProBYTE: https://ecutools.eu/chip-tuning/probyte/!

✅ Jac Diesel Bosch MD1CS089 (EGR DPF SCR DTC OFF): https://ecutools.eu/chip-tuning/probyte/...r-dtc-off/ (https://ecutools.eu/chip-tuning/probyte/jac-diesel-bosch-md1cs089-egr-dpf-scr-dtc-off/)
✅ Isuzu Diesel Bosch MD1CS089 (EGR DPF SCR DTC OFF): https://ecutools.eu/chip-tuning/probyte/...r-dtc-off/ (https://ecutools.eu/chip-tuning/probyte/isuzu-diesel-bosch-md1cs089-egr-dpf-scr-dtc-off/)

[ECUtools]

⭐️❗️PCMflash Update❗️⭐️



✅ New Module 98 and other additions in PCMflash 1.4.1: https://ecutools.eu/chip-tuning/pcmflash/



New Module 98 China Continental designed for Continental ECUs in SGMW and Geely vehicles. For SIM2K-D51/51.4/SCE60 reading/writing is supported via OBD, Easy U2/U2.5/U2W/U3.6 may require direct connection on the bench. Checksum correction is supported for all the ECUs.

https://ecutools.eu/chip-tuning/pcmflash/module-98/



➡️ Geely 01609492 (Easy U2) [RD/WR/CK]

➡️SGMW 1.2L N12 (Easy U2.5) [RD/WR/CK]

➡️SGMW 1.5L B15 (Easy U2W) [RD/WR/CK]

➡️SGMW 1.5L N15A (Easy U3.6) [RD/WR/CK]

➡️SGMW K-Line (SIM2K-D51/51.4/SCE60) [RD/WR/CK] FC-34/FC-51) [RD/WR/CK]



⭐️ More about the update: https://ecutools.eu/publications/pcmflash-update-1042025/!

[ECUtools]

❗️FLEX Update❗️

✅ Version 7.17.0.0 of Flex Out Now with a Flex OBD Solution for Continental GPECx


Version 7.17.0.0: https://ecutools.eu/publications/flex-update-02042025/
Flex: https://ecutools.eu/chip-tuning/flex-master/

[ECUtools]

❗️ProBYTE Update❗️


➡️ A new module and a file database in ProBYTE!



✅ Maxus Diesel Bosch MD1CE108 (EGR DPF SCR DTC): https://ecutools.eu/chip-tuning/probyte/maxus-diesel-bosch-md1ce108/



✅ Firmware Files Database Original Files: https://ecutools.eu/chip-tuning/probyte/firmaware-files-database-original-files/



Now you can download original firmware files directly from the program.

Quick access to the database, easy search, and simple downloads – everything you need for working with firmware. There is no subscription.

[ECUtools]

❗️FLEX New Protocols❗️



➡️ Flex Heavy Duty OBD/Bench/Boot for Master and Slave! https://ecutools.eu/publications/flex-update-08042025/



✅ FLS0.15M Flex Heavy Duty OBD/Bench/Boot Master: https://ecutools.eu/chip-tuning/flex-master/fls015m/

✅ FLS0.15S Flex Heavy Duty OBD/Bench/Boot Slave: https://ecutools.eu/chip-tuning/flex-slave/fls015s/



⭐️ With these software licenses, all supported connection modes are available: OBD, OBD Full, Bench, and Boot. You will be able to operate on all the main types of control units like ECUs, TCUs, CPCs from brands such as Bosch, Cummins, Denso, TRW, Continental.

[ECUtools]

❗️ProBYTE Update❗️



➡️ A new module in ProBYTE: https://ecutools.eu/chip-tuning/probyte/!



✅ Isuzu Diesel Bosch MD1CC878 (EGR DPF SCR DTC OFF): https://ecutools.eu/chip-tuning/probyte/isuzu-diesel-bosch-md1cc878-egr-dpf-scr-dtc-off/

[ECUtools]

❗️DashCoder4 Update❗️



➡️ DashCoder4 new solutions! https://ecutools.eu/publications/dashcoder4-update-16042025/



❕THE REAL FIRST PROVEN SOLUTION FROM THE LEADER IN MERCEDES SW



✅ MERCEDES BENZ – AMG 2023- C192

✅ MERCEDES BENZ – A-Klasse W177 2023- MOPF

✅ MERCEDES BENZ – B-Klasse W243 W247 2023- MOPF

✅ MERCEDES BENZ – C-Klasse S206 V206 W206 X206

✅ MERCEDES BENZ – CLA W118 2023- MOPF

✅ MERCEDES BENZ – CLC C254 X254

✅ MERCEDES BENZ – EQA EQB H243 X243 2023- MOPF

✅ MERCEDES BENZ – GLA H 247 2023- MOPF

✅ MERCEDES BENZ – GLB X 247 2023- MOPF

✅ MERCEDES BENZ – GLC C254 X254

✅ MERCEDES BENZ – GLE 2023- MOPF

✅ MERCEDES BENZ – GLS V 167 2023- MOPF

✅ MERCEDES BENZ – S-Klasse W223

✅ MERCEDES BENZ – SL R232

[ECUtools]

❗️ECULite Release 1.116.88❗️



✅ New software support added to ECUlite editor! https://ecutools.eu/publications/eculite-update-16042025/

[ECUtools]

❗️BitBox Update!❗️



✅ A new module in BitBox: VAG Continental Simos 8 [SM2/SM3 ONLY]: https://ecutools.eu/chip-tuning/bitbox/vag-continetal-simos-8/



⭐️ FID: 474

Module for working with Continental Simos 8.x ECUs used in petrol VAG vehicles. Supports Continental Simos 8.1x, Simos 8.2x, Simos 8.3x, Simos 8.4x.

[ECUtools]

❗️VolvoCarTool (VCTS) Update❗️



✅ Diagnostic License Volvo SPA models now in VCTS! https://ecutools.eu/additional-equipment/volvocartool-vcts/diagnostic-volvo-spa-models-obd-ii/



The license is designed for Volvo vehicles diagnostics based on the SPA platform, from the 2016 model year to the present day, including POLESTAR and POLESTAR 2 models. It works via the VCTS (VolvoCarTool) diagnostic adapter.



➡️ Read more: https://ecutools.eu/publications/vcts-update-17042025/

[ECUtools]

⭐️❗️Alientech Promo❗️⭐️



⭐️ Get KESS3 Master or Slave with protocols discount if you do not have a KESS3 yet!



➡️ KESS3 Master options:

✅ KESS3 MASTER bundle with CAR OBD + BENCH [ New ] 5480 EUR 2990 EUR: https://ecutools.eu/chip-tuning/alientech-kess-3-master/kess3-master-bundle-car-obd-bench/

✅ KESS3 MASTER bundle with Agri-Trucks OBD + BENCH [ New ] 5480 EUR 2990 EUR: https://ecutools.eu/chip-tuning/alientech-kess-3-master/kess3-master-bundle-with-agri-trucks-obd-bench/

✅ KESS3 MASTER bundle with CAR OBD + CAR BENCH + Truck/Agri OBD + Truck/Agri BENCH [ New ] 10 960 EUR 5980 EUR: https://ecutools.eu/chip-tuning/alientech-kess-3-master/kess3-master-bundle-car-obd-bench-agri-obd-bench/



➡️ KESS3 Slave options:

✅ KESS3 SLAVE bundle with CAR OBD + BENCH [ New ] 2280 EUR 1290 EUR: https://ecutools.eu/chip-tuning/alientech-kess-3-slave/kess3-slave-bundle-car-obd-bench/

✅ KESS3 SLAVE bundle with Agri-Trucks OBD + BENCH [ New ] 2280 EUR 1290 EUR: https://ecutools.eu/chip-tuning/alientech-kess-3-slave/kess3-slave-bundle-with-agri-trucks-obd-bench/

✅ KESS3 SLAVE bundle with CAR OBD + CAR BENCH + Truck/Agri OBD + Truck/Agri BENCH [ New ] 4560 EUR 2580 EUR: https://ecutools.eu/chip-tuning/alientech-kess-3-slave/kess3-slave-bundle-car-obd-bench-agri-obd-bench/



*Take advantage of this promotion from April 18th to June 16th, 2025. Offer is valid for software activation, KESS3 hardware is not included.

KESS3 Master: https://ecutools.eu/publications/alientech-promo%20-18042025/
KESS3 Slave: https://ecutools.eu/publications/alientech-promo%20-18042025/

[ECUtools]

❗️New M&D Flasher License❗️



✅ PRE-ORDER License 139 — UAZ 9S12HY64 DASH BDM: https://ecutools.eu/publications/md-flasher-update-18042025/



The license supports working with Frescale (Motorola) 9S12HY64 dashboards installed on cars: UAZ Patriot, UAZ Pickup, UAZ Profi, UAZ Profi 1.5.



➡️ Microcontroller Erasing

➡️ Mileage Writing



The license files will be sent within a week after May 6th.

[ECUtools]

❗️Autotuner Update❗️



✅ The Denso Gen4 ECU is now supported in BENCH mode for Lexus and Toyota vehicles in Autotuner: https://ecutools.eu/publications/autotuner-update-18042025/!



➡️ Key Features

Type: Engine Control Unit (ECU)

Readout: BENCHNR

MCU: R7F702002

Read time: 5min 30sec

Write time: 8min 15sec

Checksums correction

No backup creation



➡️ Compatibility List

LEXUS: 2.0 / 3.4T V6 / 350 (2.4T) / 500 V6 / 500h (2.4T) / 550 (3.4T V6) / 600 (3.4T V6)



TOYOTA: 1.5 Dynamic Force / 2.0 / 2.0i / 2.4T / 3.4T V6 / 3.4T V6 hybrid / 3.5 V6 i-FORCE MAX / 3.5i V6

[ECUtools]

❗️iProg PRO Calculators Sale❗️



➡️ Prog PRO Calculators sale till May 15th! https://ecutools.eu/additional-equipment/iprog-pro-calculator/



✅ Get 40% off Full - use the promo code calc40 https://ecutools.eu/additional-equipment/iprog-pro-calculator/full/

✅ Get 30% off Full Incomplete - use the promo code calc30 https://ecutools.eu/additional-equipment/iprog-pro-calculator/full-incomplete/

✅ Get 25% off any other protocol - use the promo code calc25



Your tool must be updated, otherwise no protocol can be bought. Feel free to contact us via email: mail@ecutools.eu to check if your dongle is updated.

[ECUtools]

⭐️❗️PCMflash Update❗️⭐️



➡️ PCMflash Update 1.4.2 presents module updates!



✅ Everything added is unique and has no duckduckduckduckogues in the world. In addition to Chinese brands, the changes also concern support for the latest Toyota cars.


PCMflash: https://ecutools.eu/chip-tuning/pcmflash/

Update 1.4.2: https://ecutools.eu/publications/pcmflash-update-260425/

[ECUtools]

❗️ProBYTE Update❗️



➡️ Two new modules in ProBYTE!



✅ OPEL ACDELCO 3 (MT35E) (CAT EVAP EGR DTC OFF): https://ecutools.eu/chip-tuning/probyte/opel-acdelco-3/

✅ Opel ACDelco 2 (MULTEC-S) (CAT EVAP EGR DTC OFF): https://ecutools.eu/chip-tuning/probyte/opel-acdelco-2/

[ECUtools]

❗️ProBYTE Sale❗️



✅ Get 15% off any ProBYTE module or FULL till May 15th using promo code ⭐️probyte-15⭐️

ProBYTE: https://ecutools.eu/chip-tuning/probyte/

[ECUtools]

❗️BitBox and BitEdit Sale❗️



✅ BitBox and BitEdit modules with a 10%-20% discount starting today till May 10th!



➡️ If you buy 1 module in ONE order for ONE dongle, please use the promo code ⭐️bitsale110⭐️ to get 10% off;

➡️ If you buy 2 or 3 modules in ONE order for ONE dongle, you can use the promo code ⭐️bitsale2315⭐️ to get 15% off;

➡️ If you buy 4 or more modules in ONE order for ONE dongle, you can use the promo code ⭐️bitsale420⭐️ to get 20% off;



❕The discounts are not applicable to special offers, full packages, slaves and credits.



The orders must be placed and paid by May 10th.

BitBox: https://ecutools.eu/chip-tuning/bitbox/

BitEdit: https://ecutools.eu/chip-tuning/bitedit/

[ECUtools]

❗️ECULite Sale❗️



✅ 20% off ECULite modules till May 8th! Use the promo code ⭐️ECULite-20⭐️



The orders must be placed and paid by May 8th.


ECULite: https://ecutools.eu/chip-tuning/eculite/

[ECUtools]

❗️Autotuner Update❗️



✅ Alpina, BMW, and Mini vehicles equipped with Bosch EDC17C06, EDC17C41, EDC17C50, EDC17CP02, EDC17CP09, and EDC17CP45 ECUs, exclusively for E-Series in Autotuner: https://ecutools.eu/publications/autotuner-update-03052025/!

[ECUtools]

❗️ESS Spring Sale❗️



ESS modules with a discount till May 11!



✅ All modules, Full Activation, Subscription, and PLUS subscription are discounted!



There is NO PROMO CODE, all the prices are listed with the discount already! Please also note that the prices are converted to USD automatically.

ESS: https://ecutools.eu/chip-tuning/ess-software/

[ECUtools]

❗️ProBYTE Update❗️



➡️ Three new modules in ProBYTE: https://ecutools.eu/chip-tuning/probyte/!



✅ Kia/Hyundai Kefico GPEGD2/CPGDSH2 (CAT EVAP EGR DTC OFF): https://ecutools.eu/chip-tuning/probyte/kia-hyundai-kefico-gpegd2-cpgdsh2-cat-evap-egr-dtc-off/

✅ Kia/Hyundai Gasoline Kefico CPEGD3.20.1 (CAT EVAP EGR DTC OFF): https://ecutools.eu/chip-tuning/probyte/kia-hyundai-gasoline-kefico-cpegd3201-cat-evap-egr-dtc-off/

✅ Jeep Diesel Bosch EDC17C79 (EGR DPF SCR DTC FLAPS OFF): https://ecutools.eu/chip-tuning/probyte/jeep-diesel-bosch-edc17c79-egr-dpf-scr-dtc-flaps-off/

[ECUtools]

❗️Tuning Solution - New Update V17.4.2.0❗️



CF MOTO MSE8 speed

LANDINI MD1CS069 adblue, dtc

MAZDA DENSO gen4 petrol lambda, dtc

VAG BOSCH M3.8.2 burbles

BOBCAT EDC17C87 dtc



& much more..



✅ Tuning Solution: https://ecutools.eu/chip-tuning/tuning-solution/

[ECUtools]

❗️CombiLoader and ChipTuningPRO Sale❗️



⭐️ Up to 20% discount on Combiloader and ChipTuningPRO modules till May 11th!



✅ If you buy modules for more than 125 USD, please use ⭐️SMS10⭐️ to get 10% off;

✅ If you buy modules for more than 630 USD, you can use ⭐️SMS20⭐️ to get 20% off;



❕modules must be bought for ONE tool



The orders must be placed and paid by May 11th!


Combiloader: https://ecutools.eu/chip-tuning/combiloader/
ChipTuningPRO: https://ecutools.eu/chip-tuning/chiptuningpro/

[ECUtools]

❗️FLEX Update❗️



✅ New Flex Update Out Now with the Second Batch of Flex Heavy-Duty Protocols: https://ecutools.eu/publications/flex-update-10052025/

[ECUtools]

⭐️❗️PCMflash Update❗️⭐️



✅ New Module 49 and other additions in PCMflash 1.4.3: https://ecutools.eu/chip-tuning/pcmflash/



NEW Module 49 Toyota/Lexus/Scion/Hino Gen 2 (supplement) is designed for bench work with Toyota ECUs with D76F0196/198/199/219 microcontrollers. The module supports reading, writing (including recovery), checksum correction. It has been tested with the following adapters Scanmatik 2/Pro/3, Mongoose Pro MFC, Tactrix Openport 2.0. A boot bench cable or Powerbox for PCMflash is required for automatic power and boot pin control.


Module 49: https://ecutools.eu/chip-tuning/pcmflash/module-49/



➡️ 76F0196/198/199/219 Bootloader [RD/WR/CK]

➡️ 76F0199 Gearbox Bootloader [RD/WR/CK]

➡️ 76F0196 HV Control Bootloader [RD/WR/CK]



⭐️ More about the update: https://ecutools.eu/publications/pcmflash-update-12052025/!

[ECUtools]

❗️T-RACE PRO Update V4.1.3.0❗️



T-RACE PRO NEW DRIVER & STAGE1/PLUS:



✅ Dacia / Nissan / Opel / Renault Bosch EDC17C42

✅ Audi / Seat / Skoda / VW Bosch ME 17.5.20

✅ Audi / Seat / Skoda / VW Bosch ME 17.5.24

✅ Audi / Seat / Skoda / VW Bosch ME 17.5.26

✅ Claas Bosch EDC17CV41

and more...




T-RACE PRO: https://ecutools.eu/chip-tuning/t-race-pro/

[ECUtools]

❗️STool Update❗️



➡️ License FD110 for mileage in STool: https://ecutools.eu/publications/stool-update-14052025/!



✅ ABS Bosch Outlander 4 (R7F701333A) - Read mileage/Write 0 km



* Attention, only ABS Bosch Outlander 4 (R7F701333A) is supported.

* Connection via CAN bus on the ABS connector.

STool: https://ecutools.eu/odometrs/s-tool/

[ECUtools]

❗️ProBYTE Update❗️



➡️ New support for Toyota in the Premium Tuning Subscription!



✅ Toyota Gasoline GEN3 P5-UDS STAGE CAT EVAP EGR duckduckduckduck DTC OFF

✅ Toyota Gasoline GEN4 P5-UDS STAGE CAT EVAP EGR duckduckduckduck DTC OFF

✅ Toyota GasolineGEN2 P5-CAN STAGE CAT EVAP EGR duckduckduckduck DTC OFF

✅ Toyota Diesel GEN3 P5-UDS STAGE EGR DPF SCR duckduckduckduck DTC OFF

✅ ToyotaDieselGEN4 P5-UDS STAGE EGR DPF SCR duckduckduckduck DTC OFF



Premium Tuning: https://ecutools.eu/chip-tuning/probyte/premium-tuning-annual/

[ECUtools]

❗️BitBox Update❗️



✅ Bosch MED17.3.5 in Module Bosch MEDC17 BENCH [SM2/SM3 ONLY]: https://ecutools.eu/chip-tuning/bitbox/bosch-med17-bench/



Added support of Bosch MED17.3.5 control units for Alfa Romeo, Ferrari, Maserati and Dallara turbo petrol vehicles in module Bosch MEDC17 Bench. Additionally, Bosch MED17.3.5 now supports control units for Alfa Romeo, Ferrari, Maserati and Dallara turbo petrol vehicles in module Bosch MEDC17 Bench.





✅ Continental Easy U2, U2.5, U3D/U3E in Module China Siemens Petrol: https://ecutools.eu/chip-tuning/bitbox/china-siemens-petrol/



BitBox have added support of Mahindra Continental Easy U2 and Foton Continental Easy U2.5 and SGMW Continental Easy U3D/U3E control units with 1.5Mb internal memory in module China Siemens Petrol.

[ECUtools]

❗️STool Version 1.78❗️



➡️ A new Mitsubishi Outlander License in STool (https://ecutools.eu/odometrs/s-tool/) and other additions!



✅ License FD110 Mitsubishi Outlander 4 ABS Bosch via CAN (CAN FD adapter)*: https://ecutools.eu/odometrs/s-tool/license-fd110/



ABS Bosch Outlander 4 (R7F701333A) Mileage reading/Writing 0 km

* Attention, only ABS Bosch Outlander 4 (R7F701333A) are supported.

* Connection to CAN bus on ABS connector.



✅ Additions to the existing licenses: https://ecutools.eu/publications/stool-update-20052025/!




STool: https://ecutools.eu/odometrs/s-tool/
CAN FD adapter: https://ecutools.eu/odometrs/s-tool/can-fd-adapter-for-stool/

[ECUtools]

❗️ChipTuningPRO Update❗️



➡️ New modules in ChipTuningPRO: https://ecutools.eu/publications/chiptuning-pro-update-23052025/!



✅ BMW MG1CS201/MG1CS024 Patch for BMW cars with S58 petrol engines: https://ecutools.eu/chip-tuning/chiptuningpro/bmw-mg1cs024-patch/



✅ KEFICO CPEGD3.20.1: https://ecutools.eu/chip-tuning/chiptuningpro/kefico-cpegd3201/

The module is designed for chip tuning of Hyundai and Kia cars with T-GDI petrol engines equipped with Kefico CPEGD3.20.1 ECU.

[ECUtools]

❗️ECULite Update❗️



✅ ECULite Release 1.117.89 presents updates to the existing modules! https://ecutools.eu/chip-tuning/eculite/

[ECUtools]

❗️ProBYTE Update❗️



➡️ Two new modules in ProBYTE: https://ecutools.eu/chip-tuning/probyte/!



✅ Kia/Hyundai AGRO Diesel Bosch EDC17CV54 (EGR DPF SCR FLAPS DTC OFF): https://ecutools.eu/chip-tuning/probyte/kia-hyundai-agro-diesel-bosch-edc17cv54-egr-dpf-scr-flaps-dtc-off/


✅ VAG MG1CA811 (CAT EVAP EGR DTC OFF): https://ecutools.eu/chip-tuning/probyte/vag-mg1ca811-cat-evap-egr-dtc-off/

[ECUtools]

❗️BitBox Update❗️



✅ Additions to Scania and Bosch MCU8.0 modules in BitBox: https://ecutools.eu/publications/bitbox-update-03062025/!



BitBox: https://ecutools.eu/chip-tuning/bitbox/

[ECUtools]

❗️Autotuner Update❗️



✅ Getrag 7DCT300 in Autotuner! https://ecutools.eu/publications/autotuner-update-07062025/

[ECUtools]

⭐️❗️PCMflash Update❗️⭐️



✅ PCMflash version 1.4.4 has been released!



⭐️ More about the update: https://ecutools.eu/publications/pcmflash-update-08062024/!

PCMflash: https://ecutools.eu/chip-tuning/pcmflash/

[ECUtools]

❗️ECUDecoder Update❗️



✅ ECUDecoder v1.89.2 presents new solutions and fixes! https://ecutools.eu/publications/ecudecoder-update-11062025/

[ECUtools]

❗️ProBYTE Update❗️



➡️ New modules in ProBYTE!



✅ Mercedes Gasoline Bosch Me 2.0 (CAT EGR EVAP DTC OFF): https://ecutools.eu/chip-tuning/probyte/mercedes-gasoline-bosch-me-20/


✅ Opel SIMTEC71.6 (CAT EVAP EGR DTC OFF): https://ecutools.eu/chip-tuning/probyte/opel-simtec716/


✅ Dodge Diesel Bosch EDC17C79 (EGR DPF SCR FLAPS DTC OFF): https://ecutools.eu/chip-tuning/probyte/dodge-diesel-bosch-edc17c79/



✅ Kobelco Diesel Denso SH7058 (EGR DPF SCR DTC OFF): https://ecutools.eu/chip-tuning/probyte/kobelco-diesel-denso-sh7058/


✅ Land Rover/Jaguar Gasoline Bosch MG1CS028 (CAT GPF EGR EVAP DTC OFF): https://ecutools.eu/chip-tuning/probyte/land-rover-jaguar-gasoline-bosch-mg1cs028/

[ECUtools]

❗️New M&D Flasher License❗️



✅ PRE-ORDER License - 116 Toyota/Lexus RH850 DASH BENCH: https://ecutools.eu/odometrs/mdflasher/license-116-toyota-lexus-rh850-dash-bench/



The license is designed to work with DENSO dashboards with Renesas RH850 R7F701401 microcontrollers mounted on Toyota and Lexus vehicles. It works via CAN bus on the bench with direct connection to the dashboard plug.



➡️Identification DTC reading/clearing

➡️Mileage reading/writing

➡️DATA FLASH reading/writing

➡️CODEFLASH area reading

➡️USERBOOT area reading

➡️OPBT0 area reading

➡️OPBT9 area reading

➡️OPBT10 area reading



Internet connection is required. Not all software versions may be supported.



The license will be available after 15.07.2025!

[ECUtools]

❗️ProBYTE Update❗️



➡️ New modules in ProBYTE!



✅ Renault Continental EMS3141 (CAT EVAP EGR GPF (DPF) DTC OFF): https://ecutools.eu/chip-tuning/probyte/renault-continental-ems3141-cat-evap-egr-gpf-dpf-dtc-off/


✅ YMZ EDC7UC31 (EGR DPF SCR DTC OFF): https://ecutools.eu/chip-tuning/probyte/ymz-edc7uc31-egr-dpf-scr-dtc-off/

[ECUtools]

❗️FLEX Update❗️



✅ Flex Support for Scania Bosch EGC4.0!



More: https://ecutools.eu/publications/flex-update-16062025/

[ECUtools]

❗️VolvoCarTool (VCTS) Update❗️



✅ New licenses in VCTS: https://ecutools.eu/additional-equipment/volvocartool-vcts/



➡️ SRS AIRBAG TMS570 GEN.2 CRASH RESET LICENSE (OBD-II) ADDITIONAL ACCESS BY TOKEN FOR VIN FROM SUPPORT: https://ecutools.eu/additional-equipment/volvocartool-vcts/srs-airbag-tms570-gen2-crash-reset-license-obd-ii-additional-access-by-token-for-vin-from-support/


➡️ MILEAGE CORRECTION BY OBD-II / J-TAG and CALCULATION only for DASH LICENSE (OBD-II MODE): https://ecutools.eu/additional-equipment/volvocartool-vcts/mileage-correction-by-obd-ii-j-tag-and-calculation-only-for-dash-license-obd-ii-mode/

[ECUtools]

❗️ProBYTE Update❗️



➡️ A new module in ProBYTE: https://ecutools.eu/chip-tuning/probyte/!



✅ Bmw Gasoline Siemens MSV70 (CAT EGR EVAP DTC OFF): https://ecutools.eu/chip-tuning/probyte/bmw-gasoline-siemens-msv70-cat-egr-evap-dtc-off/

[ECUtools]

❗️USB Dump Generator Update❗️



✅ New version 8.0.2.14



✅ A new section has appeared in information module 7: "9. Radio/navigation codes for car radios", and the list of blocks in the section "2. Pinout of ECU blocks" has also been significantly expanded: https://ecutools.eu/additional-equipment/usb-dump-generator/module-7/



✅ Algorithms have been improved and many other changes have been made to the program starting with version 8.0.2.14



➡️ USB Dump Generator (https://ecutools.eu/additional-equipment/usb-dump-generator/)

[ECUtools]

❗️ProBYTE Update❗️



➡️ A new module in ProBYTE: https://ecutools.eu/chip-tuning/probyte/!



✅ Volvo TRW EMS 2.4 (EGR DPF SCR DTC OFF): https://ecutools.eu/chip-tuning/probyte/volvo-trw-ems-2-4-egr-dpf-scr-dtc-off/

[ECUtools]

❗️ProBYTE Update❗️


➡️ A new module in ProBYTE: https://ecutools.eu/chip-tuning/probyte/!



✅ MERCEDES TRUCK ACM 2.1 (SCR OFF): https://ecutools.eu/chip-tuning/probyte/mercedes-truck-acm-21-scr-off/

[ECUtools]

⭐️❗️Alientech Promo❗️⭐️



➡️ Renew your KESS3 Master and KESS3 Slave without additions costs if it has expired for more than 60 days!



✅The offer is valid till July 28, 2025.

KESS3 Master: https://ecutools.eu/chip-tuning/alientech-kess-3-master_copy/kess3ms001/
KESS3 Slave: https://ecutools.eu/chip-tuning/alientech-kess-3-slave/12-months-subscription/

[ECUtools]

⭐️❗️PCMflash Update and important information❗️⭐️



❗️Activations will be delayed from July 3 till July 17 due to the PCMflash developer's holidays. The waiting period may reach up to 24 h. Please keep it in mind when placing your orders. Dongle replacement procedure are going to be suspended during this period (July 3-17).❗️



➡️ Version 1.4.4-1 updates:



✅ Module 89 China MG1 now supports MG1US008 ECUs in Ford Ranger vehicle with Ecoboost 2.3L engines made in China. Reading, writing, checksum correction.



Ranger 2.3L Ecoboost China (MG1US008) [P3N9] [RD/WR/CK]
https://ecutools.eu/chip-tuning/pcmflash/module-89/



✅ Module 93 India DCM7.1AP now supports Delphi DCM2.7AP ECUs in Force Motor vehicles. Reading, writing, checksum correction. as well as virtual EEPROM reading and writing.



Force 2.6L TD (DCM2.7AP) [RD/WR/CK]

Force 2.6L TD EEPROM (DCM2.7AP) [RD/WR/CK]
https://ecutools.eu/chip-tuning/pcmflash/module-93/



✅ Module 95 Toyota/Lexus Gen 4 now supports ECUs with R7F701216 microcontrollers in Toyota Land Cruiser 250 with 2TR-FE engines.
https://ecutools.eu/chip-tuning/pcmflash/module-95/

[ECUtools]

❗️FLEX Update❗️



✅ Bootloader mode for Supercars with New Flex Protocol for McLaren



➡️ Discover the new FLEX exclusive, version 7. 25. 0.0, and work on TCUs and CCUs of McLaren supercars like 570GT and 720S in Bootloader mode: https://ecutools.eu/publications/flex-update-01072025/

Flex: https://ecutools.eu/chip-tuning/flex-master/

[ECUtools]

⭐️❗️PCMflash activation delays❗️⭐️



❗️Activations will be delayed from July 3 till July 17 due to the PCMflash developer's holidays. The waiting period may reach up to 24 h. Please keep it in mind when placing your orders. Dongle replacement procedure are going to be suspended during this period (July 3-17).❗️

[ECUtools]

❗️ProBYTE Update❗️



➡️ A new module in ProBYTE: https://ecutools.eu/chip-tuning/probyte/!



✅ NISSAN SID 309 (EGR DPF DTC OFF): https://ecutools.eu/chip-tuning/probyte/nissan-sid-309/

[ECUtools]

❗️DashCoder 4 (DC4) Update❗️



✅ Update Pack 06/2025 in DashCoder 4! https://ecutools.eu/publications/dashcoder-4-update-04072025/

[ECUtools]

❗️Tuning Solution Update❗️



➡️ Tuning Solution – New Update V17.5.0.0: https://ecutools.eu/publications/tuning-solution-update-08072025/



✅ FORD SID212EVO DPF, EGR, ADBLUE, DTC

✅ DFSK ME7.8.8 LAMBDA, DTC

✅ ASTON MARTIN EEC-VI LAMBDA

✅ JAC LINCONTROL LAMBDA

✅ CHEVROLET SIMTEC76 LAMDA

& much more..



Tuning Solution: https://ecutools.eu/chip-tuning/tuning-solution/

[ECUtools]

❗️BitEdit and BitBox Update❗️



⭐️ A new BitEdit module and BitBox FID 504 addition! https://ecutools.eu/publications/bitedit-bitbox-update-10072025/



✅ Isuzu Transtron Aurix RZ4F: https://ecutools.eu/chip-tuning/bitedit/isuzu-transtron-aurix-rz4f/

A new BitEdit module for editing calibrations of Isuzu Transtron Aurix used in Isuzu vehicles with 2.2TD RZ4F engine.





✅ Isuzu Transtron Aurix: https://ecutools.eu/chip-tuning/bitbox/isuzu-transtron-aurix/

BitBox have added exclusive support of Isuzu and Mazda vehicles with Transton L7.1K ECUs based on Aurix TC275 in module Isuzu Transton Aurix.



It allows Real Reading, Virtual Reading, Writing with CS fix and as option Installation of protection from Real Read.

[ECUtools]

❗️ProBYTE Update❗️



➡️ New modules in ProBYTE: https://ecutools.eu/chip-tuning/probyte/!



✅ Volvo Diesel TRW EMS 2.3 (EGR DPF SCR OFF DTC OFF): https://ecutools.eu/chip-tuning/probyte/volvo-diesel-trw-ems-23/


✅ Renault Diesel TRW EMS 2.3 (EGR DPF SCR OFF DTC OFF): https://ecutools.eu/chip-tuning/probyte/renault-diesel-trw-ems32/

[ECUtools]

❗️FLEX Update❗️



✅ OBD and Bench for the 6-gear transmission units in FLEX!



➡️ New release with version 7.26.0.0 of Flex, focusing on OBD and Bench support for Denso SH72531 TCUs installed on Mazda vehicles: https://ecutools.eu/publications/flex-update-15072025/



With this new OBD protocol, you can seamlessly access the map area by connecting the OBD cable to the diagnostic socket of the vehicle, whereas with the Bench protocol you can now access the full content of Flash and EEPROM memories.

[ECUtools]

❗️New iProg Scripts❗️



New iPROG PRO Scripts from Cardiag! https://ecutools.eu/publications/new-iprog-scripts-160720925/



✅ KTM Duke SPC5645S (CAN-BUS): https://ecutools.eu/additional-equipment/iprog-pro/ktm-duke-scp5645s/


✅ MG 5 EV (70F3532 Locked) Continental CAN-BU: https://ecutools.eu/additional-equipment/iprog-pro/mg-5-ev-70f3532-locked-continental-can-bus/

[ECUtools]

❗️ProBYTE Update❗️



➡️ A new module in ProBYTE: https://ecutools.eu/chip-tuning/probyte/!



✅ Suzuki Gasoline Melco MH81XX (CAT EVAP EGR DTC OFF): https://ecutools.eu/chip-tuning/probyte/suzuki-gasoline-melco-mh81xx/

[ECUtools]

❗️Scripts for UPA-USB Serial Programmer-S are here❗️



✅ Scripts for UPA-USB Serial Programmer-S are now available! https://ecutools.eu/publications/scripts-for-upa-17072025/



➡️ Various systems are supported:



✅ ABS

✅ BCM

✅ BSI

✅ Dashboard

✅ Ecu

✅ PCM

✅ duckduckduckduck

✅ SAS

✅ SRS Airbag

✅ PANEL

✅ Tools

[ECUtools]

❗️Mercedes DSM/DSM222 EEPROM Clone Tool has been added❗️



✅ Mercedes DSM/DSM222 EEPROM Clone Tool allows transferring EEPROM in gear selector control units with the FBS3/FBS4 DSM (Continental) on Mercedes-Benz cars (205/212/222/166/447/907): https://ecutools.eu/additional-equipment/mercedes-dsm-dsm222-eeprom-clone-tool/



➡️ Find out more: https://ecutools.eu/publications/mercedes-cloning-tool-180725/!

[ECUtools]

❗️CHECKECU - New Update V7.4.1.0❗️



➡️ NEW SOLUTIONS ADDED:



✅ duckduckduckduck Vag Bosch MG1CS011 SPC5777

✅ duckduckduckduck Opel Bosch EDC17C42

✅ ECU Audi RS6 Bosch MG1CS008

✅ DASHBOARD DR 6 MB91F594

✅ AIRBAG Bmw 1 Series F40 Continental

and more...

CHECKECU: https://ecutools.eu/additional-equipment/check-ecu/

[ECUtools]

❗️Autotuner Update❗️



➡️ Continental GPEC4LM in Autotuner! https://ecutools.eu/publications/autotuner-update-26072025/

[ECUtools]

❗️ECM Titanium Drivers Update❗️



✅ New ECM Titanium Drivers for Bosch MED17.9.32 ECU – SsangYong. https://ecutools.eu/publications/ecm-titanium-update-26072025/

[ECUtools]

❗️ECULite Update❗️



✅ ECULite Release 1.118.90: New software for previously released modules https://ecutools.eu/publications/eculite-update-29072025/

[ECUtools]

❗️FLEX Update❗️



✅ Program Bosch E68 engine units installed on Cadillac CT6 vehicles produced in 2019 and in 2020 in FLEX: https://ecutools.eu/chip-tuning/flex-master/.



➡️ More information here: https://ecutools.eu/publications/flex-update-29072025/

[ECUtools]

❗️❗️PCMflash Activation Delays❗️❗️



From August 1st to 11th inclusive, the PCMflash activations will come with a delay. Dongle replacement procedure is going to be suspended during this period. Please plan your work and purchases accordingly.


PCMflash: https://ecutools.eu/chip-tuning/pcmflash/

[ECUtools]

⭐️❗️Alientech Promo❗️⭐️



⭐️ Get KESS3 Master or Slave with protocols discount if you do not have a KESS3 yet!



➡️ KESS3 Master options:

✅ KESS3 MASTER bundle with CAR OBD + BENCH [ New ] 5480 EUR 2990 EUR (https://ecutools.eu/chip-tuning/alientech-kess-3-master/kess3-master-bundle-car-obd-bench/)

✅ KESS3 MASTER bundle with Agri-Trucks OBD + BENCH [ New ] 5480 EUR 2990 EUR (https://ecutools.eu/chip-tuning/alientech-kess-3-master/kess3-master-bundle-with-agri-trucks-obd-bench/)

✅ KESS3 MASTER bundle with CAR OBD + CAR BENCH + Truck/Agri OBD + Truck/Agri BENCH [ New ] 10 960 EUR 5980 EUR (https://ecutools.eu/chip-tuning/alientech-kess-3-master/kess3-master-bundle-car-obd-bench-agri-obd-bench/)



➡️ KESS3 Slave options:

✅ KESS3 SLAVE bundle with CAR OBD + BENCH [ New ] 2280 EUR 1290 EUR (https://ecutools.eu/chip-tuning/alientech-kess-3-slave/kess3-slave-bundle-car-obd-bench/)

✅ KESS3 SLAVE bundle with Agri-Trucks OBD + BENCH [ New ] 2280 EUR 1290 EUR (https://ecutools.eu/chip-tuning/alientech-kess-3-slave/kess3-slave-bundle-with-agri-trucks-obd-bench/)

✅ KESS3 SLAVE bundle with CAR OBD + CAR BENCH + Truck/Agri OBD + Truck/Agri BENCH [ New ] 4560 EUR 2580 EUR (https://ecutools.eu/chip-tuning/alientech-kess-3-slave/kess3-slave-bundle-car-obd-bench-agri-obd-bench/)



*Take advantage of this promotion from August 1st to September 8th, 2025. Offer is valid for software activation, KESS3 hardware is not included.

KESS3 Master and Slave: https://ecutools.eu/publications/alientech-promotion-01082025/

[ECUtools]

❗️FLEX Update❗️



✅ Exclusive Service for ETC3 (2017-2024) in FLEX!



With version 7.28.0.0, FLEX now supports in OBD and Bench ECUs installed on DAF Trucks produced from 2017 to 2021.


Version 7.28.0.0: https://ecutools.eu/publications/flex-update-05082025/
FLEX: https://ecutools.eu/chip-tuning/flex-master/

[ECUtools]

❗️Autotuner Update❗️



✅ VAG EDC15P+/EDC15VM+ in Autotuner: https://ecutools.eu/publications/autotuner-update-05082025/!

[ECUtools]

❗️BitEdit Update❗️



✅ A new module in BitEdit: Toyota Denso Diesel 7: https://ecutools.eu/chip-tuning/bitedit/toyota-denso-diesel-7/



Software module for editing calibrations Denso Gen4 ECU of deisel Toyota and Lexus vehicles.

BitEdit: https://ecutools.eu/chip-tuning/bitedit/