Autotuner Tool Explained: Master vs Slave and Modes
In short: the Autotuner tool is a professional device that reads and writes engine (ECU) and transmission (TCU) software. It comes as a master version that can edit files or a slave version linked to a master, and it works over OBD, on the bench or in boot mode.

The Autotuner tool is a professional ECU and TCU programming tool that many chiptuners use to read and write engine and transmission control units. If you searched for “autotuner”, “autotuner master” or “autotuner compatibility”, this guide explains what the tool is, how the master and slave versions differ, which access modes it offers and what to check before you buy. The information below comes from the maker and from resellers, so treat the claims as the vendors’ own.
Key takeaways
- Master reads and writes unencrypted files you can edit. Slave works with encrypted files that only its master can change.
- Three access modes: OBD, bench and boot. Some controllers need an unlock patch first.
- Coverage claims differ by seller. Always check your exact ECU on the current compatibility list.
- The maker states there is no subscription and updates are free. The US store lists $5,899 (checked in October 2026).
What is the Autotuner tool?
Autotuner describes its tool as a simple, fast and universal solution for ECU and TCU reprogramming, aimed at professionals. It reads and writes the software of control units in cars, and its US store also lists trucks, motorcycles, ATVs, agricultural equipment and jet skis. Besides reading and writing, it supports data logging, reading and clearing fault codes and a dyno mode. It also corrects checksums automatically when you write a modified file, and it has a “back to stock” function.
Master vs slave
The same hardware is sold in two versions, and the choice decides how you work:
- Master: reads and writes unencrypted calibration files. You can edit them yourself or send them to any tuning file provider. It is meant for people who develop their own tuning files.
- Slave: reads and writes encrypted files that only its designated master can modify. The master is chosen at purchase and the slave is linked to it. It is meant for people who do not develop their own files.
A slave can be upgraded to a master, or moved to another master, with the approval of the current master, according to the maker. Masters can decrypt slave files in the Autotuner software, in the website admin panel or through the master API. If you buy from a dealer or file service, ask which version you are getting and who the master is.
Read and write modes
| Mode | How it connects | Notes from the maker |
|---|---|---|
| OBD | Through the diagnostic port, without opening the controller | Some models need an OBD unlock patch, applied through bench, boot or a mail in unlock |
| Bench | Directly to the controller, removed from the car | Can back up many controllers and bypass secure gateway locks. Some models need a bench unlock patch |
| Boot | On the circuit board of the removed controller | Can bypass secure gateway locks. On some models boot mode is enabled after reading the password through OBD |
This is the same logic we explained for diesel units in our Bosch EDC17 guide. Which mode works depends on the ECU, its software version and its protection level. For example, Autotuner lists OBD read and write for several EDC17 variants, including EDC17C47, CP07 and CP37 on a Toyota 1.4 D 4D.
How many vehicles does it cover?
Figures differ by seller and date. The US store lists more than 24,500 vehicles and more than 800 controllers (checked in October 2026), while an older reseller page claimed over 10,000 vehicles. The maker publishes a compatibility list for the tool and for its personal flasher, AutoTuner One. Always check your exact vehicle, engine, ECU and software version against the current list before you order, because a general claim of coverage does not tell you whether your unit can be read in the mode you need.
Software, updates and requirements
- The maker states there is no subscription, no update fee and no flash credits, and that updates are free.
- The software needs Windows 11, an x86 processor above 2.5 GHz, 4 GB of RAM, 2 GB of free disk space, a USB 2.0 port and a 1920 by 1080 screen. Virtual machines are not supported.
- An internet connection is required, according to one reseller.
- Autotuner lists a five year warranty.
What is in the box and what does it cost?
The US store lists a price of $5,899 (checked in October 2026) and a box that includes the tool, a USB key with the software link, a USB cable, a power supply with plugs for several regions, an OBD cable, a universal cable with a connector box and boot accessories such as a probe positioning kit and a bench cable set. Prices and contents vary by seller, region and version, and slave versions are priced differently, so use these figures only as a guide.
Autotuner compared with other tools
Autotuner is one of several multi protocol tools. For another example, read our overview of the Alientech KESS V2. For a side by side view, see Autotuner vs KESS3 vs Flex, or start from our chiptuning tools guide. If you are new to the topic, start with what ECU remapping is and how chip tuning compares with tuning boxes.
Before you buy or use one
- Make a full backup of the original file before you write anything, and keep it.
- Check that your exact ECU is supported in the mode you need, and whether it needs an unlock patch.
- Understand the legal side: changing software can affect emissions rules, your warranty and your insurance. See whether chiptuning voids your warranty.
- Decide between master and slave based on whether you will write your own files.
Frequently asked questions
What is the difference between Autotuner master and slave? The master reads and writes unencrypted files and can modify them. The slave works with encrypted files that only its master can modify.
Does Autotuner work over OBD? Yes for many controllers, but some models need an OBD unlock patch first, applied through bench, boot or a mail in unlock.
Does it correct checksums? The maker states that it corrects checksums automatically on map data.
Master and slave tools, read modes and checksums all appear in the Workshop level of the ECU Tuning Quiz. See how many you get right.
